OK in hopes of getting lower temps,decided to re-apply the thermal paste on my GPU's that are being water cooled with.."Danger Den 8800gtx full Water blocks"
I originaly used the paste and thermal stickies they came with,this was like over a year ago.Now I applied AS5 on the core and Ceramic paste on the memory.I noticed I had put a pretty good amount originally and I went lighter this time around.But now my temps are 8dg higher.Did I mess up on the application or will the temps drop over time.
i think you might have needed to apply therman paste. It makes all the difference in the world. Make sure you cleared the previous glue that was stuck on the GPU before applying new paste.
------------------------------Do not fall prey to perceived obsolescence.
Reply to DarthPiggie
Agree, sounds like you may have left some of the old paste/sticky stuff on by accident. However, yes AC5 will lower in temp after time, but I don't think it would be that many degrees.
Message edited by bjmarler on 05-11-2008 at 02:45:30 PM
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.