hello, i have GIGABYTE P35 DS3L mobo,
yesturday when i turned my pc on, the HDD LED was on for the whole time, it is not 100% bright, but i can tell it has little power , it is flashing slightly, i unplugged all my hdds but it was on. what is going on?
i have checked cords on the mobo that is connected to the LED
------------------------------E4400, 3GB DDR2 PC2 5300, 2X 320GB HDD, 3X DVD RAM DL,
Radeon HD 2600Pro ICEQ Turbo, OCed (783/575) from (600/500) factory OC (650/525)
Corsair VX 450
GA-P35-DS3L
If you boot with all the drives removed and the HD light is on then I would blame the mobo. I would default the mobo by shorting the pins and boot again with no HDs to see if that clears it.
I'm assuming that this has been working for a while and then failed, and the HD LED has a dedicated pair of wires to the mobo header.
Message edited by Zorg on 07-01-2008 at 10:35:07 AM
i never touched those wires since i have built my computer. and it has been working fine,
power LED is connected too
can sudden power off shock the mobo?
because few days before i accidently pushed off on that power spreader( forgot what its called) with my foot, which i use it for my pc, LCD, External HDD printer.
Message edited by jhyukkang on 07-01-2008 at 07:05:38 PM
------------------------------E4400, 3GB DDR2 PC2 5300, 2X 320GB HDD, 3X DVD RAM DL,
Radeon HD 2600Pro ICEQ Turbo, OCed (783/575) from (600/500) factory OC (650/525)
Corsair VX 450
GA-P35-DS3L
Reply to jhyukkang
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.