Ntldr is missing, got booted with usb, now what?

[applesfaceman]

i got an ntldr is missing message, i made a boot disk with a usb drive and used it, i am not logged in to windows, yay. but when i restart the computer i have to once again boot from the flash drive manually through bios>boot order or w/e.. now that i am logged in to windows how do i make it stop having the ntlrd is missing message.. i got the boot files and info from
http://www.tinyempire.com/notes/ntldrismissing.htm
but the instructions as to what to do after im in windows are very unclear to me, please help.
thank you

 

[treefrog07]

1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair Windows.
4. Log into your Windows installation
by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter that password.
6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\

7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

 

[ivanois]

1. Insert the Windows XP bootable CD into the computer.
2. When prompted to press any key to boot from the CD, press any key.
3. Once in the Windows XP setup menu press the "R" key to repair Windows.
4. Log into your Windows installation
by pressing the "1" key and pressing enter.
5. You will then be prompted for your administrator password, enter that password.
6. Copy the below two files to the root directory of the primary hard disk. In the below example we are copying these files from the CD-ROM drive letter, which in this case is "e." This letter may be different on your computer.

copy e:\i386\ntldr c:\
copy e:\i386\ntdetect.com c:\

7. Once both of these files have been successfully copied, remove the CD from the computer and reboot.

I have a netbook, without cdrom. I try to install the windows 7 via the usb flash.

 

[Dark Lord of Tech]

Start a new thread.