No signal on screen on start up Tags: Safe Mode Configuration Windows XP Last response: September 16, 2010 2:35 AM in Windows XP Share Anonymous September 15, 2010 8:40:22 PM Hello, when i turn my pc on it flashes with windows then says no signal and comes up with the safe mode screen i have tried all, start up normally, safe mode, last know config f10 still keeps coming up with the same screen More about : signal screen start aford10 September 16, 2010 2:35:45 AM Start-->run-->msconfig-->general tab-->make sure normal boot is selected-->boot.ini tab-->make sure none of the boot options are checked. Can't find your answer ? Ask ! Publish Related resources: ForumNo signal on screen when starting start up ForumNo Start , Black Screen - No Signal , New MB, Same Problem ForumPC freezes during start up and now no signal to monitor ForumNew system, No signal and no start up beeps ForumBlack screen lock up , no signal ForumSimple and Free Guide to Removing Malware ForumScreen goes to sleep at start up Forum[Solve] Screen goes blank at start-up ForumBlank screen on start up ForumDVI No signal , after Windows 8 Startup and Bios screen ForumWeird Screen Freeze and Video Signal Issue ForumNo BIOS Start Up Screen ForumScreen resolution resets to low on start-up ForumGigabyte HD 7850 Screen signal on/off ForumBlack screen on start up :-( ForumBlack screen no bios on start up ForumScreen : No signal ForumHELP!!! Please with Windows XP ForumBatch file to start a service ForumBought New Hardrive for Windows Xp 2002 & no signal in monitor now? More resources Read discussions in other Windows XP categories Configuration Customization Drivers Security Video !