Higher than 3ghz???

[mokuj1m]

recently I just OC my E7300 with my new xig HDT SD964 to 3ghz (9.0x333mhz) with 1,2 Vcore, 1,25v NB, DDR2 667 (5-5-5-12)

idle @ ~42C, full load @ ~58C (4+ hours prime95), with this condition can I OC to 3,33ghz with 10.0 multi??

if can, which bios setting that I need to change (vcore, timing, NB volt, etc)? THANKS ALOT

 

[brendin]

just try and bump ur vcore till its stable, dont go over 1.4v tho since its a 45nm,
also you shouldnt have to increase ur NB volts unless ur going to 400+ fsb or have sli/crossfire
and temps up to 70 are o.k. as long as its stable but <60 is best

 

[mokuj1m]

i've tried using multiply 10.0 so @ 3,33ghz, n bump the vcore to 1,25volt. but still unstable, 3d mark'06 passed but failed prime test in just less than 5 min. any suggesstion anyone? i just dont want to bump to much higher vcoresince it will be hotter, 3ghz@1,2vcore is so stable but, only 0,33ghz increase with 0,05vcore is very not stable. i cant believe this