Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > X48-DQ6 memory problems with 4 modules

X48-DQ6 memory problems with 4 modules

Forum Motherboards & Memory : Gigabyte - X48-DQ6 memory problems with 4 modules

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
Peligroso   07-23-2008 at 06:33:39 PM

Hello,

So, I have some big problems with my X48-DQ6. I have 4 memory sticks Corsair Twin2X PC6400 CAS4 on 2GB each, 8GB in total and my motherboard just refuses to boot with this memory. I have tried setting +0.3V to the DDR voltage and been trying to tweak the MCH settings all the way up to +0.3 but I really just can't seem to get it to work. Has anyone got this to work, and if so, with what settings?

Very grateful for help.

Best Regards,
David N

Add a reply
Sponsored Links
Register or log in to remove.
geofelt   07-23-2008 at 07:07:19 PM
- 0 +

You might want to go the the Corsair support forums. I would think it should work.
Run memtest86+ on each stick alone to verify that they are all good.


Message edited by geofelt on 07-23-2008 at 07:08:46 PM
Reply to geofelt
Peligroso   07-23-2008 at 07:13:17 PM
- 0 +

Already been to corsair forums, was out of luck though. They thought I should contact gigabyte and the gigabyte support replied back like 3 weeks later with some standard reply.

Reply to Peligroso
geofelt   07-23-2008 at 07:22:23 PM
- 0 +

Is your problem with 4 sticks vs. two?
I have trouble running 8gb at anything better than stock.

If each stick tests out ok, individually, then put a known good stick in each mobo slot to test. It is possible you have a bad memory slot.

Is there a bios update for the mobo that might address the issue?

Reply to geofelt
geofelt   07-23-2008 at 07:26:20 PM
- 0 +

There is a gigabyte forum that is frequented by a gigabyte rep.
http://forums.tweaktown.com/f69/

Reply to geofelt
Albertwt   08-09-2008 at 03:46:29 PM
- 0 +

Yes man,

i also have the same problem, see my thread in: http://forums.tweaktown.com/f69/gi [...] lem-27292/

and also in http://forums.overclockers.com.au/ [...] ost9213284

Please any idea of how to fix this ?

Reply to Albertwt
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > Gigabyte > X48-DQ6 memory problems with 4 modules
Go to:

There are 553 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.343 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them