Smart data identical
Last response: in Storage
ello i recently purchased a wd1001fal and installed windows xp (slow ntfs format before installing). I ran Western Digital DataLife Guard Diagnostics to check smart dat see illustration below
http://img221.imageshack.us/img221/7200/99373824.jpg
what really bothers me is the data above threshold on the new drive. What is weird is that the data is almost identical to the old drive that i thought i had to replace and the drive before that....... My motherboard is a ga-p35-s3. Can anyone help?
http://img221.imageshack.us/img221/7200/99373824.jpg
what really bothers me is the data above threshold on the new drive. What is weird is that the data is almost identical to the old drive that i thought i had to replace and the drive before that....... My motherboard is a ga-p35-s3. Can anyone help?
More about : smart data identical
Related ressources:
- ForumTwo identical drives....very different benchmarks.
- ForumThe Smart Traveler\'s Guide to Data Theft Protection
- Forum2 HDDs identical , copied all data , 1 shows more than other?
- ForumWindows7:hard drive failure,( smart disabled) + RawReadErrorRate
- ForumS.M.A.R.T . Failure
- ForumSMART threshold check ... Failed
- Forumcan't enable SMART
- ForumSMART Data wrong?
- ForumAsus Tusl2- smart failure!
- ForumExtract data from HDD with bad sectors ( SMART results)
- ForumHow to recover data from SMART BAD hard disk
- ForumSmart test fail but all data still fine without error
- ForumSMART PREDICTS FAILURE, BUT WD'S DATA LIFEGARD SAYS HDD FINE
- ForumMod/ smart sata 3
- ForumBios detecting version of windows that are no longer there
- Forum[Solved] RAID 1 without losing my data
- ForumMoving RAID-0 or just reading the data
- ForumRecover data with Active Partition Recovery
- ForumSMART Values; are they OK?
- ForumHow do I retrieve data from my hard disk?
- More resources
Read discussions in other Storage categories
!
