Check this out guys my amd phenom 710 overclock 3.6ghz with pics

i managed to overclock it to 3.6ghz..can go higher but im not trying now..maybe soon,,temps on load are 35c to 45c max..and idle are 28c to 30c..

CPU-Z 1.50 report file
Processor(s)
Number of processors 1
Number of cores 3 per processor
Number of threads 3 per processor
Name AMD Phenom II X3 710
Code Name Deneb
Specification AMD Phenom(tm) II X3 710 Processor
Package Socket AM2+ (940)
Family/Model/Stepping F.4.2
Extended Family/Model 10.4
Core Stepping RB-C2
Technology 45 nm
Core Speed 3640.4 MHz
Multiplier x Bus speed 13.0 x 280.0 MHz
HT Link speed 1960.2 MHz
Stock frequency 2600 MHz
Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
L1 Data cache (per processor) 3 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache (per processor) 3 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache (per processor) 3 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache (per processor) 6 MBytes, 48-way set associative, 64-byte line size
Chipset & Memory
Northbridge AMD 790GX rev. 00
Southbridge ATI SB750 rev. 00
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 2048 MBytes
Memory Frequency 373.4 MHz (3:4)
CAS# Latency (tCL) 5.0 clocks
RAS# to CAS# (tRCD) 5 clocks
RAS# Precharge (tRP) 5 clocks
Cycle Time (tRAS) 15 clocks
Bank Cycle Time (tRC) 15 clocks
Command Rate (CR) 2T
System
System Manufacturer BIOSTAR Group
System Name TA790GX 128M
System S/N None
Mainboard Vendor BIOSTAR Group
Mainboard Model TA790GX 128M
BIOS Vendor American Megatrends Inc.
BIOS Version 080014
BIOS Date 01/13/2009
Memory SPD
Module 1 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Corsair
Module 2 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Corsair
Software
Windows Version Microsoft Windows XP Professional Service Pack 3 (Build 2600)
DirectX Version 10.0
22 answers Last reply
More about check guys phenom overclock 6ghz pics
  1. Give info on wat cooling u are using???
  2. its a cooler master tx2 multi socket cooler..i cant seem to go past 3.6..i tried..i tried upping the cpu vcore but no luck..tried upping the nb core no luck..any suggestions?
  3. I see what your memory was running at stock, but not what it is running with the OC. Can you check on cpu-z where it sits right now? I'm guess that it is what is holding you back by what you've posted. Have you already tried knocking the memory divider down to the 667 or 533 settings?
  4. it is ddr2 800 ram and i put the divider to ddr 533 so rite now its around 366mhz..
  5. Can you get it to run at 12x300?

    What are your current NB and HT multipliers?

    CPU voltage? Ram Voltage?
  6. my htt is at 1.4ghz and my nb is at 1600 i belief..i have no multi..right now currently readind cpuz shows

    htlink-1925

    nb-2200
  7. my voltages are ram 2.2

    nb 1.4

    ht 1.30

    cpu vcore 1.5
  8. Well, then your NB appears to be set at a multi of 8x and your HT at 7x. I'd try and set them to the same multiplier (7 or 8), and see how that affects things.

    First things first, though, did 12x300 work?
  9. im going to try it in a bit..if that dont work..what else can i do
  10. i just tried it...12x 300 and it is looking very stable..thnk i can go higher?
    i also put the nb and ht mulis the same as you said..
  11. here is my cpuz at 3.6ghz 12x 300

    CPU-Z 1.50 report file
    Processor(s)
    Number of processors 1
    Number of cores 4 per processor
    Number of threads 4 per processor
    Name AMD Phenom II X3 710
    Code Name Deneb
    Specification AMD Phenom(tm) II X4 10 Processor
    Package Socket AM2+ (940)
    Family/Model/Stepping F.4.2
    Extended Family/Model 10.4
    Core Stepping RB-C2
    Technology 45 nm
    Core Speed 3600.5 MHz
    Multiplier x Bus speed 12.0 x 300.0 MHz
    HT Link speed 2400.3 MHz
    Stock frequency 2600 MHz
    Instruction sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64
    L1 Data cache (per processor) 4 x 64 KBytes, 2-way set associative, 64-byte line size
    L1 Instruction cache (per processor) 4 x 64 KBytes, 2-way set associative, 64-byte line size
    L2 cache (per processor) 4 x 512 KBytes, 16-way set associative, 64-byte line size
    L3 cache (per processor) 6 MBytes, 48-way set associative, 64-byte line size
    Chipset & Memory
    Northbridge AMD 790GX rev. 00
    Southbridge ATI SB750 rev. 00
    Graphic Interface PCI-Express
    PCI-E Link Width x16
    PCI-E Max Link Width x16
    Memory Type DDR2
    Memory Size 2048 MBytes
    Memory Frequency 400.1 MHz (3:4)
    CAS# Latency (tCL) 5.0 clocks
    RAS# to CAS# (tRCD) 5 clocks
    RAS# Precharge (tRP) 5 clocks
    Cycle Time (tRAS) 18 clocks
    Bank Cycle Time (tRC) 15 clocks
    Command Rate (CR) 2T
    System
    System Manufacturer BIOSTAR Group
    System Name TA790GX 128M
    System S/N None
    Mainboard Vendor BIOSTAR Group
    Mainboard Model TA790GX 128M
    BIOS Vendor American Megatrends Inc.
    BIOS Version 080014
    BIOS Date 01/13/2009
    Memory SPD
    Module 1 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Corsair
    Module 2 DDR2, PC2-6400 (400 MHz), 1024 MBytes, Corsair
    Software
    Windows Version Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    DirectX Version 10.0
  12. Sorry to say it, but, it looks to me like you hit the ceiling with the processor. You just overclocked everything else higher than your other overclock without issue.
  13. one more thing guys if you guys havent caught it,...i have enabled the 4th core..running stable at 3.5 with a mutli of 11.5x305..voltage of 1.48
  14. If I was in the market for a new PC I would definitely base it around that sweet little x3 chip. Seems like you got a great deal.
  15. yes i did..i thought it would be unstable but all cores seem to work great as a quad core..so if your in the market looking for a new mob and cpu..get a biostar or a mobo with the special bios and the x3 phenom 2...and you might get a good quad deal..
  16. hey Witeboy can you make a tut on what you did OCing & Enabling the 4th core I am about to build a new system with this cpu
  17. sure why not..it should be ready by the end of the day today..
  18. Me don't see pics?
  19. With pics??? :heink:
  20. I got the same cpu only have it at 3.2 im gona try more
  21. tried the same tips and have mine running at 3.5 what voltage should i set my gskill 1066. its currently at around 726mhz
  22. sorry guys but the pic was supposed to be the cpuz chart never got around to see how to save it..but i got to copy the data and yea kal20 mx you shouldnt just leave it ther...
Ask a new question

Read More

CPUs Overclocking Processors Phenom