im running a AMD 5000 non black edition
cpuz reads
core speed 3209MHz
Mult x 13
bus Speed 246.1 ( i belive its set at 248)
HT link is 493.8mhz. ill increase it a little once im stable
cpu is at 1.325v
RAM ddr2 800mhz
Frequency 320mhz (set at 266 so i might up it to 333 to see what happens) and the latency is rated at 5 clocks for 333mhz and 6 for 400mhz so should i leave it at 320mhz and 5 CAS or try to up it close to 400mhz and use 6 clocks for cas?
all voltages are default exept the CPU
is there anything i should consider or any warnings, i keep reading that it is hard to push a 5000 to 3.2 without upping the multipler so i think i did something wrong as it was way to easy. im goign to go run prime and ill report back with what i got
cpuz reads
core speed 3209MHz
Mult x 13
bus Speed 246.1 ( i belive its set at 248)
HT link is 493.8mhz. ill increase it a little once im stable
cpu is at 1.325v
RAM ddr2 800mhz
Frequency 320mhz (set at 266 so i might up it to 333 to see what happens) and the latency is rated at 5 clocks for 333mhz and 6 for 400mhz so should i leave it at 320mhz and 5 CAS or try to up it close to 400mhz and use 6 clocks for cas?
all voltages are default exept the CPU
is there anything i should consider or any warnings, i keep reading that it is hard to push a 5000 to 3.2 without upping the multipler so i think i did something wrong as it was way to easy. im goign to go run prime and ill report back with what i got