Barracuda PCB

[netrino]

Hi everyone!

I need to buy the PCBs of the following HDD models - 3 disks full of priceless personal data have crushed and i have to recover the data:

1. Seagate Barracuda 7200.11 500 GB SATA
ST3500620AS
P/N: 9BX144-100
FIRMWARE : LC11
Made in Thailand

2. Seagate Barracuda 7200.11 750 GB SATA
ST3750330AS
P/N: 9BX156-303
FIRMWARE : SD15
Made in Thailand

3. Western Digital WD2500JS-22NCB1 250GB SATA
LBA 488397168
DCM: DBCANT2AHB

Any information will be useful

Thanks!!!!

 

[jedimasterben]

Good luck with that.

Do you have any experience with drive recovery on the hardware level? Do you know how to properly remove the platters without damaging them? Do you have a "clean room" or whatever they're called that will have no dust particles or anything flying around? If not, then look here: http://www.drivesaversdatarecovery.com/

 

[sampatrik]

hello dear i am happy to help you , hard drive is a very sensitive device and to recover data from hard drive, you need to be very careful because if you made made a single mistake then your valuable data will lost for ever. For recover data from hard drive we provide very good and easy to use software which will make your task very easy.
visit: http://www.hard-drive-recovery-software.com/

 

[pPaul]

I am also searching for a harddrive PCB. I have searched all morning no real luck.


Barracuda LP 1.5.TB
S/N 9Xw01HPF
ST31500541AS
P/N 9TN15R-510
Firmware CC34
Date Code 10175
Site Code TK

Contact information
dnbpaul@yahoo.com

 

[spectro69]

Dear friend, I have all the necesary to swap the pcb of some hitachi hds but when I conect the new pcb.. shows me strange characters.. Do I have to make something special to make work the hard disk hitachi with his new pcb? any program?
Thanks..

 

[leon2046]

hi, i found this site has lots of Barracuda pcb boards, http://www.hddzone.com/seagate-pcb-c-1.html

Gooood luck!