My New XIGMATEK! 120mm CPU Heat Sink!

[Zerk]

Just in case anyone would like to know? today i Got my XIGMATEK Cooler and its Awesome! Its Big you need a 8" wide Case to get it to Fit,but Dang its worth it,i OC'ed my E8400 again back to 3.6GHz its Great! at Stock speeds 3.0GHz before i got it i did some tests to see the Diff,with Stock Cooler,and full load it hit temps of 65C and idled at 56C, Now At 3.6GHz and The XIGMATEK Cooler it Idles at 42C and under Full load only hits 46C Awesome! with the C1E Enhanced Halt State Disabled and Multiplier locked at 9X,Just opened the Bus to 1600MHz or 400MHz and its Great! Also i had to take my GPU and Ram out to get it in,its Sweet though,Thanks for Reading!

 

[ALANMAN]

That's Awesome, Congrats.

I'd like to get one for my E8400. 3.6GHz sounds like Nice boost, esp. at cooler temps.

 

[teeth_03]

I hit 3.8 ghz stable with mine,my slow RAM is limiting me from hitting 4 ghz I think,stable.

Yeah,awesome CPU cooler,works well with my Antec 900 case,becase the fan on the CPU is mouted inline with the back exhaust fan,blowing all the air out the back

 

[Zerk]

Yea thats the way i put it to! ahaha! thanks Buddies! and when i got it it had a TomsHardWare 2008 Best buy sticker on it!