Tom's Hardware > Forum > Overclocking > General Discussions > E5200 on a P5Q SE Plus overclocking problem

E5200 on a P5Q SE Plus overclocking problem

Forum Overclocking : General Discussions - E5200 on a P5Q SE Plus overclocking problem

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
lsotto_2005   05-12-2009 at 03:05:00 PM

I overclocked my e5200

3.0GHZ at (240X12.5)
Vcore=1.267
PCI-E =100
RamVolt.=2.1v
RamFSB=800[Corsair XMS DDR2800MHZ]
FSB:RAM=3:5


Everything seems stable, computer starts and runs smoothly. It can stay on for a while but sometimes when I play a game (In this case Need for Speed Undercover) the game freeze's and the computer restarts. No error message, no blue screen, nothing. Just a simple restart.

Anyone have an Idea what the problem might be??

Add a reply
Sponsored Links
Register or log in to remove.
MaDMagik   05-12-2009 at 11:02:18 PM
- 0 +

And how is that different from your last thread?

"Everything seems stable" - did you actually test it for stability?

Message quoted 1 times
Reply to MaDMagik
lsotto_2005   05-12-2009 at 11:43:34 PM
- -1 +

MaDMagik wrote :

And how is that different from your last thread?

"Everything seems stable" - did you actually test it for stability?



Yes tested it for stability with orthos and just stressing the CPU it stops at 20 minutes and when stress testing both cpu and ram it only last 2 minutes.

Any Idea? I looked at the manual. Read it. Still many questions. Can you help or is it too much to ask?

Message quoted 1 times
Reply to lsotto_2005
MaDMagik   05-13-2009 at 12:42:54 AM
- 0 +

lsotto_2005 wrote :

Can you help or is it too much to ask?

You have some cheek, I tell you.



Suggestions from other people on your previous thread:

Daship: "Read the OC stickys. Try more v-core"

evilshuriken: "Looking at the settings you posted, I can tell that your problem at this point is probably your vcore. "

I know what does the guide say about VCore

Yet you post here again stating your orignal vcore.

Look man, if you cant be bothered than go to some shop, flash the cash and let them do it for you.

Reply to MaDMagik
daship   05-13-2009 at 01:21:02 AM
- 0 +

What do you mean it seems stable and then say it dont pass any stress test?????????????

Until it passes orthos or prime over 8 hours dont ask for help on a restart or BSOD.

Reply to daship
lsotto_2005   05-13-2009 at 01:50:31 AM
- 0 +

[quotemsg=1800129,4,359196]You have some cheek, I tell you.


I only ask. I have a suggestion, If you dont like helping, dont answer the thread. very simple. you showed interest in the topic so I asked you. Dont like it, dont answer back!!

Next time think about it...

Message quoted 1 times
Reply to lsotto_2005
MaDMagik   05-13-2009 at 03:02:46 AM
- 0 +

Your confusing help with doing legwork for you. And that smartass attitude wont take you anywhere. But good luck!

Message quoted 1 times
Reply to MaDMagik
RJR   05-13-2009 at 03:23:04 AM
- 0 +

lsotto_2005 wrote :

[quotemsg=1800129,4,359196]You have some cheek, I tell you.


I only ask. I have a suggestion, If you dont like helping, dont answer the thread. very simple. you showed interest in the topic so I asked you. Dont like it, dont answer back!!

Next time think about it...




Ahhh, to be 12 years old and very stupid.

Your parents must be proud. :lol:

Now, raise your vcore and set your ram to 1:1 and stop acting like a spoiled little brat, then brush your teeth and go to bed.

Message quoted 1 times
Reply to RJR
lsotto_2005   05-13-2009 at 04:16:22 AM
- 0 +

RJR wrote :

Ahhh, to be 12 years old and very stupid.

Your parents must be proud. :lol:

Now, raise your vcore and set your ram to 1:1 and stop acting like a spoiled little brat, then brush your teeth and go to bed.




They only problem with that "genius" if you would do your research before talking, this particular BIOS doesn't have that option unless you know exactly where its located and what it's called. Because I don't.

That is the purpose for this forum... Not to insult people who have doubt with childish talking. If you have problems with explaining or answering I tell you the same thing I told the other guy. DON'T ANSWER THE THREAD. Thank you.

Message quoted 1 times
Reply to lsotto_2005
lsotto_2005   05-13-2009 at 04:22:16 AM
- 0 +

MaDMagik wrote :

Your confusing help with doing legwork for you. And that smartass attitude wont take you anywhere. But good luck!



Hmmm... legwork... funny. So you consider, "go read something and if you have doubts after reading tell me so that I can make fun of you" intelligent.?

I could say that and I don't know what I talking about. But as I said before. That's what this forum is for. So once again, I tell you, don't like my question? DONT ANSWER IT. Very simple.

No go play along with some else because I dont have time to be wasting on bored, unhappy people. Thank you.

P.S. Leave the reply's for people who really want to help.

Reply to lsotto_2005
RJR   05-13-2009 at 04:31:26 AM
- 0 +

lsotto_2005 wrote :

They only problem with that "genius" if you would do your research before talking, this particular BIOS doesn't have that option unless you know exactly where its located and what it's called. Because I don't.



Did you brush your teeth yet??? It's getting late.

(I put my hand up to my head, you know mind reading) AHHHHH, I know what motherboard and Bios he's using......................It's a .................a.............Asus, right.


Quote :

P.S. Leave the reply's for people who really want to help.



OK, I'll have to explain it to him.

NOBODY wants to help you!!!!!

Reply to RJR
snakeeater_za   05-13-2009 at 02:28:14 PM
- 0 +

lsotto_2005 wrote :

[*** off...



Such a shame. Such a good chip that for overclocking, I have the same one. And the guys in this forum helped me wind mine up nicely, but your attitude sucks bro. If you want ppl to help you, at least PRETEND you're a nice person. But I agree. Bed time. Watch out for monsters under the bed.. And enjoy your feeble overclock

Reply to snakeeater_za
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > General Discussions > E5200 on a P5Q SE Plus overclocking problem
Go to:

There are 1158 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.785 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
Related Topics
See all relatives topics
They won a badge
Join us in greeting them