Sign in with
Sign up | Sign in
Your question

Would this PSU work with the 4850

Last response: in Components
Share
August 6, 2008 3:14:21 PM

Hey guys i have a psu from another computer. Its a Enermax 530 w. For the 12v it says 12v1 is 18a and 12v2 is 18a. It also states a total for the 12v rails which for some reason in 34 amps. Now can this run a q6600 with a 4850?

Again its the 530w Enermax EG565P-VE (24p)

So far by some research it seems pretty good.

More about : psu work 4850

August 6, 2008 6:20:46 PM

yep no problems at all with that imo.
August 6, 2008 6:34:08 PM

ATI Radeon HD 4850 System Requirements

450 Watt or greater power supply with 75 Watt 6-pin PCI Express® power connector recommended (550 Watt and two 6-pin connectors for ATI CrossFireX™ technology in dual mode)
Certified power supplies are recommended. Refer to http://ati.amd.com/certifiedPSU for a list of Certified products.
Related resources
a b ) Power supply
August 6, 2008 6:38:09 PM

Yes. You need at least 32A and got 34A. Just don't go wild adding lots of hard disks and fans and lights and PCI cards and so on.

August 6, 2008 6:38:22 PM

Your power supply is AMD certified!
August 6, 2008 7:20:33 PM

you got 36A and need 32A for the gfx, if you don't have any overusage in the rest of the system you should be fine :) 

else you will know and just get a bigger one, but you should have no problems unless you got like 4-5 hdds and tons of other stuff in the case
August 6, 2008 7:57:37 PM

Thanx guys i was just wondering cause its kinda old
!