Tom's Hardware: Topic RAID 0 Problem
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions.
Sign up now! Its free!
Hi,
New kid on the block and not that experienced in PC building. I have a P5Q3 motherboard with an ICH10R Controller. When I create a RAID 0 array with 2 750gb hard drives, everything goes well - the RAID utility says it's bootable, the BIOS sees it, and I can install OS and use it However, when I create the array with 3 750gb hard drives, the array gets created but the utility says it's not bootable, the BIOS only sees "Hard Drive" and during the Windows installation, I'm unable to create the full partition. After creating a partial partition and formatting it, the install fails - message "hard drive configuration problem" - or something to that effect. On my old Intel board (D975XBX2) I had no trouble at all with this 3-drive RAID 0 array. Any suggestions????
Thanks 
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Sponsored links
Ad
Related Topics
- p5k-e raid problem
- Frustrating RAID problem.
- JMicron IDE Raid Controller Problem
- Problem setting up RAID w/ GA-x38-DS4
- GA-P35-DS3R/S3R Version 1 Intel RAID problem
- Weird Problem with Giga Raid on GA-P35-DS3 Help Plz?
- RAID 0 Problem with P5k Deluxe. Please Help
- GA-P35C-DS3R RAID Rebuild problem
- Problem Raid 0 asus p5n32e sli plus
They won a badge
Join us in greeting them
- 09:06 ulysses35 won the CPUs badge
- 01:00 fleeb won the Freshman badge
- 01:00 jaymoney61 won the Freshman badge
- 07:06 amdfangirl won the Watchman badge
- 01:00 benw won the Freshman badge
- 01:00 anmjoven won the Freshman badge
- 01:00 dpnaugle won the Freshman badge
- 01:00 ayeohx won the Freshman badge
- 03:58 sanchz won the Sophmore badge
- 03:56 HansVonOhain won the Sophmore badge