DDR2-800 or DDR2 1066

Will i notice a difference in performance if i use the DDR 2 800? Will it be more noticable and faster with the 1066?
12 answers Last reply
More about ddr2 ddr2 1066
  1. You won't notice a difference between the two. Go with DDR2 800 with good timings and as close the the JEDEC standard 1.8v as you can find. Something like this is a good choice.
  2. If you have an Intel E8xxx CPU and plan to do any overclocking go 1066. If anything else go 800.
  3. I say go for a DDR2 800 RAM with 4-4-4x or lower timings because the difference between DDR2 800 and 1066 isnt much and DDR2 800 OC's very good too.
  4. Some P35 motherboards have problems with DDR2-1066.
  5. Another +1 for DDR2 800. You're better off with good timings. You can always loosen up the timings and push the memory to 1066 (I hear that most 1066 modules are overclocked 800s).
  6. If you are using an AM2+ (ie Phenom/Tri-Core) go with the DDR2 1066, if just a regular AM2 (dual core), or Intel Proc use DDR2 800 with good timings. (4.4.4.*)
  7. ^ that is the trick.....
    If Intel, use 800mhz.
    IF AMD, use 1066.
    Intel won't benefit much from faster memory, AMD has the integrated memory controller on chip, and will show improvement with faster memory.
  8. u guys sure?
  9. Maziar, I have 4 1066mhz CL5 ram chips in my machine so heres my experience.

    2 chips you can hit speeds well above 800mhz without bring up the fsb to 400mhz (1600mhz qdr). 4 chips makes going over 800mhz difficult. Sure the ram will be set to higher than 800mhz but the bandwidth will still be limited. Its a northbridge limit. Secondly I run my chips at 875mhz CL4 which is way faster than 1066mhz CL5.

    Hell on my custom 3DMark06 runs (1920x1080 8xAA 16xAF) it only adds about 500 points from changing the ram settings. :whistles:
  10. i see thanks :)
    But i want to know that is it true that use DDR2 1066 for AM2 and DDR2 800 for intel?
  11. Me E8300 is at 4Ghz, meaning I have to run my RAM at DDR 2 1000 to match it. My RAM is 800 stock. If you plan to run it 1:1 and could get up to 1000 you might as well get RAM that is already there, that way when you increase the voltage you can losen the timings, while in order for me to hit 1000 I had to up the timings to 5-5-5-15 from 4-4-4-12 (hit that wall at around 925).
  12. The AM2+ will see a benifit with 1066 (ONLY WITH PHENOM, OR TRI-CORE!). The Intel will get more of a benifit from RAM with good (4.4.4.*) timings. The older AM2 (ie the 5000+ BE, or any X2 proc) will not, I say again will NOT! be able to use higher than DDR2 800 (memory restrictions on older procs). The reason for this is the AMD chips have an onboard memory controller (the intel does not.............YET!)(wait for Nehalem for the onboard Mem controller)
Ask a new question

Read More

Memory DDR2 Performance DDR Product