I have a new JNC62k mobo from jetway. I installed Speedfan on my computer and it shows my harddrive running between 40-44C, processor between 42-50C no problems. But the core temp on my Nvidia IGP chipset is idle around 67C with a load as high as 81C... is this thing gonna melt?
I don't know if it matters, but the manufacturer specs state the mobo can operate up to 115C without problems.
I think you just answerd your own question.
If they say it's good at 115c, when it burns you can try to get another one from them. Good luck, though. Jetway is bottom of the barel.
---------------
If the automobile had followed the same development cycle as the computer, a Rolls-Royce today would cost $100, get a million miles to the gallon, and explode once a year, killing everyone inside.
PSA
Ok, just to update... Since the fan was blowing directly into the bottom of the harddrive from the heatsink I decided to try taking the fan off and just passive cooling the heatsink. The case that this is in is all mesh on 3 sides so airflow is great.
Results:... 57C on idle, 70C on load after 30 minutes. The harddrive temp dropped 4C and the CPU temp Dropped 2C. So I will assume that for a Nvidia chipset 70C is ok as they tend to run hot anyways.
