XMS2-8500 dominator ram 1066 with mobo problemo

[banytoshbot]

Basically i have built a new system and wasnt getting any signal to the moniter....
After days and days of research i found out that it wasnt a problem with my cpu, nor gcard..... nor mobo (as i even ordered a new one =S) so i got my mates gcard and ram over, tested gcard... still no signal. then i wacked in his ram (normal 800mhz 1.8v ram) to find out i get a boot screen and bios! EUREKA!
Soooo... realised that my ram was 2.1v (the dominator corsair ram) so i turned the DRAM voltage up to 2.1, and freq up to 1066mhz, took his ram out... put mine in and again, no boot screen.
Can any1 help me
My specs are:

Asus P5k PRO mobo
xfx 8800gtx
Q6600
CORSAIR dominator -c2-8500 ram (1066mhz 2.1v)
CM realpower Modular psu 700w

thanks for reading

 

[col-p-todd]

I had the same problem with the same ram one or two on your sticks are defective and have to be replaced. I send mine in and am still waiting for the replacement.