Asus Striker II EXTREME + 8Gb OCZ DDR3 PC3-10666 = CODEINIT Error

Hi, everyone. I've built a computer on Asus Striker II Extreme and have bumped into a slight problem. As it is written in the specs (Striker II supports 8Gbs') I've purchased 2x(2x2Gb) OCZ DDR3 10666 (1333MHz) memory. But computer boots only at upto 6Gb (eg 3 cards installed). At the installation of 4th it stuck with CODEINIT error, which dissappears as I take off the 4th card and boot again. Memory in BIOS is set to 9-9-9-20 at 1.70V as said in manufacturers site.

Asus Striiker II Extreme + (4 x 2Gb) OCZ DDR3 PC3-10666 = CODEINIT Error :pfff:
Asus Striiker II Extreme + (1 or 2 or 3 x 2Gb) OCZ DDR3 PC3-10666 = Normal Boot :bounce:

Please, help.
1 answer Last reply
More about asus striker extreme ddr3 10666 codeinit error
  1. You have to read the manual.

    The manual says:

    "Due to chipset resource allocation, the system maybe detect less then 8GB system memory when you installed four 2GB DDR3 memory modules."

    Not all memory can be supported in all four modules on this motherboard.

    Look at page 2-19 and 2-20.
Ask a new question

Read More

Motherboards Asus DDR3 OCZ