Case BLING

What options are out there to make my case look fast (since the machine contained within is not XD). I have one plexi side with a blue led glowing fan, and some blue LED thing in the front of the case.

So what else is out there to really take my machine's look from tame to TRON?

(Flame all you want, this is more of a fun post to see how far somebody can go to give their machine that "Auto Zone" look. :))
13 answers Last reply
More about case bling
  1. Use neon cable sleeves and a black light mounted on the bottom of case. Also saw a while back theres lights that light up with noise, harder the noise the more light.
  2. Cold cathodes
  3. Cant edit.
    Luminous paint could work
  4. Malorne said:
    What options are out there to make my case look fast (since the machine contained within is not XD). I have one plexi side with a blue led glowing fan, and some blue LED thing in the front of the case.

    So what else is out there to really take my machine's look from tame to TRON?

    (Flame all you want, this is more of a fun post to see how far somebody can go to give their machine that "Auto Zone" look. :))


    Quote:
    What options are out there to make my case look fast


    I leave a message taped to the Power On button to call me before 7 PM the time the Escort service arrives.
  5. Walmart fake spinner rims.

    Seriously, why not put the money into the performance of the machine, and not its gaudiness?
  6. I saw this one movie - about a car named 'Grease' - it had a plexiglass top, and it could fly. There was an odd amount of singing in that movie - seemed strange. Oh - add big red and orange flames on the side - that will help too.
  7. Walmart spinners is good! :lol: Or you can have Steve Nunez draw a picture for like 5K. Cost more than a wicked fan. But you got the dough and know what to do.

    http://www.youtube.com/watch?v=fNTqszKoWiM

    http://www.youtube.com/watch?v=GMt6A3T2BUs
  8. Buy a Corvette logo and bolt it on to the front of your case ^_^
  9. Add one of these lighter & cup holders.
    http://www.xoxide.com/xray1.html
  10. There was a guy who posted the 'cool' Mod a while back. He built his system in the closet. Not temporaritly...permanently! The MB was mounted on the wall with wires dangling in all directions. He had pictures. Then he ran PVC pipe through the floor down into the basement. Fans pushed cold basement air up into the closet through the pipes over the MB to keep it cool. I think he was using like an Athlon 2600+ on a socket A MB. No Corvette LOGO on the closet door. :lol:
  11. Hang some of these in your window. You can mix and match colors!

  12. Right you are Ken!

    Just the types of responses I was looking for. There are already too may Vanillaroma trees decorating the monitor, don't wanna make it too much of a theme.

    I'm definitely gettin a spinner, didnt even think of that, thanks!
Ask a new question

Read More

Power Supplies Cases LED Monitor Components