XFX 780i BIOS P08

[davidzill]

Most up-to-date BIOS will not let me change VCORE or FSB voltage in BIOS. When I enter a value, the actual voltage remains stock setting, no changes at all. when in windows on hardware monitor or CPU-Z, there indications reflect the stock settings. What may cause this issue?

 

[overshocked]

There is a reason the saying goes the way it does.

"if there is nothing wrong with your mobo then dont update the bios"

I would just go back to the previus bios version.

 

[davidzill]

all of this happend before i updated bios. updating bios was supposed to be a fix to the problems i was having

 

[overshocked]

So your saying that when you manually set teh vcore in the bios. then you hit "save and exit" and boot into windows your voltages reset?

 

[davidzill]

yes exactly, but the bus speed remained, now i cannot change it. if i revert to my original stable overclock in BIOS, i get a constant BSOD citing IRQ not equal to or less. i am basicall stuck @ 4.05ghz, with vcore @ 1.3 and FSB @ 1.3, which is no where near enough for 4.05ghz

 

[overshocked]

Dude really. this calls for an rma.

I think your bios chip is screwwed

 

[NemesisX]

ok i know in new here and this is a old post i had same probs if you have the nvidia 6.03_nvidia_system_tools 6.01 or 6.02 installd uninstall it thats whats locking the seting in. when you have done redo the cloking to were you want then all good its crap i know but that what i have to do there must be a beter way of doing it but that what iv been doing it works all the time trust me