jtmoney528 Distinguished Jul 23, 2009 147 0 18,690 Aug 11, 2009 #1 I am using/installing the Cogage True Spirit and I have it all in place but I can slide it from side to side and rotate it. Does this mean I put too much thermal grease on the CPU? I used the thermalright's method on their website.
I am using/installing the Cogage True Spirit and I have it all in place but I can slide it from side to side and rotate it. Does this mean I put too much thermal grease on the CPU? I used the thermalright's method on their website.
overshocked Distinguished Feb 14, 2009 1,999 0 19,960 Aug 11, 2009 #2 You did screw it down, correct? Upvote 0 Downvote
505090 Distinguished Sep 22, 2008 1,575 0 19,860 Aug 11, 2009 #3 sounds like it isn't attached properly Upvote 0 Downvote
jtmoney528 Distinguished Jul 23, 2009 147 0 18,690 Aug 11, 2009 #4 It was a pushpin down not a screw down. They are through on the bottom of the board and clicked down. Upvote 0 Downvote
It was a pushpin down not a screw down. They are through on the bottom of the board and clicked down.
overshocked Distinguished Feb 14, 2009 1,999 0 19,960 Aug 12, 2009 #5 You should be able to turn it a couple of degrees but not much. Upvote 0 Downvote