Tom's Hardware: Topic K9N V2 Motherboard Issue
Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions.
Sign up now! Its free!
Hello everyone I am knew but I had a small issue with my motherboard.
Firstly I got it for free from a friend and all and all its a sweet board but after running GPU-z it shows my GPU at x8 vs x16.
PC Specs
X2 5400+ @ 3.2ghz
4x 1GB G-skill DDR2800
2x 500GB Seagate HDs
1x 8800GT 512mb GPU
vx750w Corsair PSU (got it for 50 bucks ^-^)
It is a SLI board and I don't have a second GPU hooked in. Its runs at x8 in SLI mode but I can't get x16 from it when not in SLI on a single GPU.
Here is a screenshot of gpu-z
Any ideas as to why?
Also I was reading and one guy said that X2s can only run 2x DDR2 800 memory but underclock it to 667 after 2GB sticks is this true?
Message edited by Twist86 on 10-17-2008 at 10:31:50 AM
Please mind
You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.
Sponsored links
Ad
Related Topics
- Motherboard for Q6600
- Upgrading my motherboard
- New motherboard
- Installing new motherboard: install it or format hard drive first?
- Processor with higher FSB then motherboard
- Asus P5nsli motherboard reporting as nforce 4 chipset (it's nforce 5)
- Is my motherboard dead?
- New build motherboard suggestions
- A motherboard that can use both on-board and Graphics card?
They won a badge
Join us in greeting them
- 01:00 jpwhite won the Freshman badge
- 01:00 kc2rxo won the Uniformed badge
- 01:00 louisa lampton won the Uniformed badge
- 01:00 derstarke won the Uniformed badge
- 01:00 asusjuniorbuilder won the Uniformed badge
- 01:00 duzcizgi won the Uniformed badge
- 01:00 triclops41 won the Freshman badge
- 23:32 Maziar won the Motherboards badge
- 01:00 dcproulx won the Freshman badge
- 01:00 doktordave won the Uniformed badge