Tom's Hardware > Forum > Motherboards & Memory > Memory > need help voltages

need help voltages

Forum Motherboards & Memory : Memory - need help voltages

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

i have a GA-EP35C-DS3R MB and 2 Gb 2x1 Corsair XMS2 DHX CM2X1024-6400C4DHX and in bios the voltage on the dimm is normal at 1.95 and i can raise it +0.1 +0.2 and so on...the thing is that i am trying to get 2.1v and i can't seem to get there....only 2.05 at +0.2 in bios and 2.15 at +0.3 in bios..can anyone help me set the voltage to 2.1

Add a reply

Standard DDR2 voltage is 1.8V, so +0.2 will be 2.0V and +0.3 will be 2.1V. You should be fine at +0.3.

------------------------------ e2160@3GHz: OCing my way to Ubuntuland!
Reply to Mondoman

yes but if i put it to +0.3 bios and everest shows me 2.15v :|

Reply to buliwyf1988dec

The sensors aren't that accurate. Set the BIOS to 2.1V (i.e. +0.3) and don't worry about it.

------------------------------ e2160@3GHz: OCing my way to Ubuntuland!
Reply to Mondoman

Ask the community Add a reply

Tom's Hardware > Forum > Motherboards & Memory > Memory > need help voltages

Go to:

Help |
Forum rules

There are 1166 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.569 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Focus On

need help voltages

Forum Motherboards & Memory : Memory - need help voltages

Please mind