well im running prime 95, on the setting that says it uses alot of power and heat or somthing like that. It seemed like the most intensive. and i have hwmonitor and cpuz up at the same time.
my question is this
my vcore is at 1.475 ( which seems high )
@ 425 fsb x 8 = 3.4
but my temps are under 53c on all cores. that seems really low. ( a good tihnk but it has me worried)
what other temp monitoring software can i use to make sure its ok.
I have a zalman 9700 with mx-2 and its ruinning at %100 3000rps ( i dont mind the noise and i didnt wana use the controller so i got it in the MB.
Im trying to stay under 60c to be same 24/7 for 3+ yrs right
any way thanks guys!
my question is this
my vcore is at 1.475 ( which seems high )
@ 425 fsb x 8 = 3.4
but my temps are under 53c on all cores. that seems really low. ( a good tihnk but it has me worried)
what other temp monitoring software can i use to make sure its ok.
I have a zalman 9700 with mx-2 and its ruinning at %100 3000rps ( i dont mind the noise and i didnt wana use the controller so i got it in the MB.
Im trying to stay under 60c to be same 24/7 for 3+ yrs right
any way thanks guys!
Facebook
Twitter
Instagram