GA-EP43-DS3L Blank Display on boot

[Chalkmark]

Hey all

I've just built a new system with a Gigabyte GA-EP43-DS3L motherboard, Intel E8400 and BFG GTX260 OC Maxcore. I've installed all the components, when I boot up the CPU and Case Fans start but the graphics card fan doesn't and the display stays blank.

Can anyone offer any advice?

Thanks!

 

[Andy73]

I too have exactly the same problem and if anyone has a solution i would be greatly appreciative of your help.

 

[chookman]

1.Check all power is connected... IE , CPU 4 or 8 pin connector in the mainboard and PCI-e GPU power connected.

2.Clear CMOS

3. Reseat RAM and GPU.

4. Disconnect everything from mainboard other than 1 stick of RAM, CPU and GPU

5. If still no work try another PSU

6. Still no work try step 4 outside of case.

7. RMA mobo