P7N2 Diamond Problems

[mishima]

So my Evga 680i sli burned, so i bought the p7n2 MB and I cant change any voltages, just the FSB and ram speed. I am using a E6600 cpu but i am unable to overclock it more than 3.2ghz. on my old 680i i was running at 3.4ghz for the last year! any ideas how can i change the voltages in the bios?

 

[outlw6669]

Crack open your Manual, turn to page 3-19 and read up on the Cell Menu settings.
All your voltages can be adjusted from there.

 

[mishima]

Crack open your Manual, turn to page 3-19 and read up on the Cell Menu settings.
All your voltages can be adjusted from there.

I already read the manual! The problem is that where im supposed to change the voltages its slightly faded, i press enter to enter the voltage i want and noting happens. **** bios.
Im using the version 1.1 of the bios.

 

[we_are_theBorg]

I already read the manual! The problem is that where im supposed to change the voltages its slightly faded, i press enter to enter the voltage i want and noting happens. **** bios.
Im using the version 1.1 of the bios.

FYI guys, even though they're slightly grayed out and don't look like they work, if you hit the + and - buttons on the numpad the values will change.... not very intuitive. I know this is an old board, but there ya go.