Sign in with
Sign up | Sign in
Your question

P5K mobo with Corsair Twin2x4096-8500C5 problems

Last response: in Memory
Share
November 7, 2008 4:29:16 PM

CPU : E8400
first of all i'm a newbie with ram settings, i've been trying to get my ram to run at 1066 after i've tried this setups http://www.houseofhelp.com/forums/showthread.php?t=6800... and http://www.houseofhelp.com/forums/showpost.php?p=264192...
i've got this from the cpu-id







i wonder if i've done it correctly coz the FSB is 5:8, shouldn't it be 1:1?
and on the "Max Bandwithd" shows PC2-6400 (400 MHz) shouldn't it be 8500 and 533Mhz?
also this is my Mobo bios ui (it was all set to default)... thanks in advance...






November 7, 2008 4:35:38 PM

*CPU-Z*
a b } Memory
a c 139 à CPUs
November 7, 2008 4:57:22 PM

P35 chipset + DDR2-1066 = grief. Sorry, I tried to make some work on three different boards, and always had trouble. The same RAM is now perking along nicely in the AMD 790GX rig I built for my wife, and the P35 boards are running just fine with DDR2-800.
!