Tom's Hardware > Forum > Overclocking > CPUs > Window block my overclock

Window block my overclock

Forum Overclocking : CPUs - Window block my overclock

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Ask the community Add a reply

Bottom Search this thread

recently i overclock my E7500 to 4.3ghz on window 7 64 bit,but the problem is i can boot but my window would run normal. its window problem . can u give me the best window that can only go further. :hello:

Intel E7500,hyper x 1066@8G,EP45-UD3P V1.1,REAL POWER 1000W

Message edited by mezal1981 on 09-28-2009 at 05:20:03 AM

------------------------------ WINDOW 7(64),INTEL E7500@4.2ghz,HYPERX 8G,EP45-UD3P,REAL POWER 1000w,HD4870 1G,32".AQUAGATE MAX,JVC DIGITAL CINEMA 5.1 SOUND SYSTEM.

Add a reply

If Windows does not run normal, then you do not have a stable overclock.

You must be able to enter Windows, and run a stress program for several hours, like Prime. Then, and ONLY then if you have no problems, can your overclock be considered succcesful.
You need to go back to the drawing board, or lower your overclock until your rig becomes stable again.

Reply to jitpublisher

Whats your vcore? Most likely the CPU isn't stable.

Message quoted 1 times

Reply to AKM880

AKM880 wrote :

Whats your vcore? Most likely the CPU isn't stable.

VCORE 1.32

------------------------------ WINDOW 7(64),INTEL E7500@4.2ghz,HYPERX 8G,EP45-UD3P,REAL POWER 1000w,HD4870 1G,32".AQUAGATE MAX,JVC DIGITAL CINEMA 5.1 SOUND SYSTEM.
Reply to mezal1981

Ask the community Add a reply

Tom's Hardware > Forum > Overclocking > CPUs > Window block my overclock

Go to:

Help |
Forum rules

There are 584 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.348 seconds

Focus On

Window block my overclock

Forum Overclocking : CPUs - Window block my overclock