Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > Need memory timeing help
Ask the community Add a reply
Word :    Username :           
 
x_2fast4u_x   11-16-2008 at 08:41:26 AM

Ok, my problem is that onece i set up my computer up my memory timeings are at 8-8-8-18, that was my "optimal" settings under my Bios, i had to manualy set it to 6-6-6-16 anyhtign under that and my system will not POST like is should, any help here?

 

Memory:Crucial BallistX ddr-800 (6400) Rated 4-4-4-14 800mhz
MoBo:EVGA 750i


Message edited by x_2fast4u_x on 11-16-2008 at 08:44:42 AM
Add a reply
Sponsored Links
Register or log in to remove.
x_2fast4u_x   11-16-2008 at 05:23:33 PM
- 0 +

ok, i think i bound my problem. My memory is rated at 2.2v and my MoBo is running it at like 1.9.

ok that was a failure every time i try to bump up voltage to 2.2 it gets freaky on me.

Reply to x_2fast4u_x
unclefester   11-16-2008 at 07:27:24 PM
- 0 +

What is your comand rate (cr1 or cr2)

Reply to unclefester
x_2fast4u_x   11-16-2008 at 10:06:02 PM
- 0 +

CPU-Z
current:
Type: ddr2 --Channels# Dual
Size 4096MBytes

 

Timings
Dram Frequency 398.1Mhz
FSB: DRAM 14:13(unlinked in bios)
CAS# Latency (CL) 5.0 clocks
RAS# to CAS# delay (tRCD) 5 clocks
RAS# to Precharge (tRP 5 clocks
Cycle time (tRAS) 18 clocks
Bank cycle time (tRC) 23 clocks
Command Rate (CR) 2T


Message edited by x_2fast4u_x on 11-16-2008 at 10:08:23 PM
------------------------------ Q9650@ 4.05ghz
GTX285 black edition
2x2gb G.kill 1200mhz
780i SLI FTW
 Reply to x_2fast4u_x
unclefester   11-17-2008 at 05:11:54 AM
- 0 +

You might try running 2x1 at 5-5-5-18 and if you can run stable,tighten them 4-4-4-14.Then put 2 back in.
I see your at 61% OC, if the first step doesn't work you may want to half your OC, then start bringing it up a little at a time.

Sorry I don't know Intel very well, I'm running on a AMD platform.So I may no be much help.

Reply to unclefester
Ask the community Add a reply
Tom's Hardware > Forum > Motherboards & Memory > General Motherboard > Need memory timeing help
Go to:

There are 1167 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.534 seconds
Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them