Articles & News
Graphics & Displays
Tom's IT Pro
Login | Sign Up
The authority on tech
Sata 2/pata 1
Jan 6, 2010, 8:18 AM
my computer is dell bendium 4, 514rams. it shut down completely and when booted its not recognising SATA 2 and PATA 1 drives. i have try all the possible ways but still no result. please help.
Jan 6, 2010
Jan 6, 2010, 2:19 PM
Do you get anything on the screen? Any beeps?
If nothing on the screen, try this:
Build outside the case with power, beeper, cpu and mobo. Listen for beeps. Keep adding components and listen for beeps.
Ask a new question
* Need opinions on high-volume SATA models *
Did I buy a SATA 6gb/s for nothing?
P5Q Deluxe - HDD in eSata not listed in sata list, normal?
SATA Hard Drives Not Detected in BIOS or Windows 7 Setup
SATA port0-3 native mode
965P-DS3 Questions (SATA, RAM, FAN speed, Startup time)
P2B-F + SATA trouble
No post or freeze at post after sata
SATA CONNECTORS - Blue, Black or does it matter please?
ATA 133 vs SATA
RAID0 + SATA + NCQ?
SATA Drive not recognized
BSOD then upon reboot SATA not detected until SATA port switched.
Internal SATA to SATA transfer speeds at 20Mb/sec... Please Help!
Sata hdd not recognized by BIOS
SATA setup on 8KNXP rev. 2.0
SATA drives not found
SATA cable length to get and type
Subscribe to our newsletter
icon arrow stem circle
About Tom's Hardware
Licensing and Reprints
Other Shopsavvy sites
© 2017 Purch All Rights Reserved.