Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > Totally crysis!!

Totally crysis!!

Forum Graphic & Displays : Graphics Cards - Totally crysis!!

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!

Related content

See all topics related to "totally crysis"

Ask the community Add a reply

Bottom Search this thread

Having problem playing Crysis!example:start crysis then blank and then auto restart the cpu.WHAT HAPPEN!!Need some pro to help me!
Using ati 8.8 driver didnt oc or set anything(totally stock)(play other games no problem)

here my spec

Intel core 2 quad Q9400 2.66GHZ 6mb
Asus P5Q-Pro
Gainward HD 4850 GS 512DDR3
2GB 1066mhz corsair dominator
320GB sata2 Seagate
Huntkey Titan 650W
Vista ultimate sp1 32bit

more advice more helping.thanks^^

Add a reply

that psu looks suspicious but if other games run fine i ain't sure.

------------------------------ I'm a git, deal with it.

Antec 1200,PC Power & Cooling 750,Gigabyte DS4-x48,Intel Q9550@3.4 W/Xigmatek S1283,8GB OCZ DDR2 800,ATI 4870X2,X-FI>CA 640C amp>Tannoy R300/Senn 595's
Reply to strangestranger

I recently read a review of the Huntkey 700 that Bestbuy sells. It is apparently the same as the Huntkey 650 (yours), just with additional lying on its label, and can't cut the mustard. I'm not sure your load is enough to stress it, but it might be. What are your temps as this happens? Does it restart immediately, or after it has run for a while? If the former, then perhaps it is the PSU; if the latter it could be heat (still possibly within the PSU).

------------------------------ There is ALWAYS a drone. Exactly where, or how many drones you will encounter may vary, but that there will be at least one will not.
Reply to jtt283

I had a similar issue in Lotro... turned out to be DX10.
I turned off DX10 (lotro has that option) and she was good to go on Q9550/4870x2

Message quoted 1 times

Reply to grieve

temps all seem ok.other games play also seem fine.only crysis,haven start play become blank then few second auto restart

Dont knw is DX10 problem or not?

got any idea?anyway i want say thanks 1st to u guys.!

Reply to dandy

I had almost the exact same problem, this is how you trouble shoot it:
Start Crysis, as it starts to load, start spamming alt+ Enter ( windowed mode) and try to get it to run windowed, or use any other method of getting it to run windowed. If you get it into window mode and it runs fine, then it is a PSU issue. If you can start it in widow mode but have the same problem then good luck finding out what the prob is. When I upgraded my PS this prob went away for me, good luck.

------------------------------ Core i7 920 @ 4.0Ghz - Gigabyte UD5 - 12GB Corsair XMS 3 - 2X ATI 58701GB Crossfire- Zalman 850W - X-FI Fatality Gamer Pro - Xigmatek Thor's Hammer - Raptor X 150 - WD Black 1TB OCZ Vertex Turbo 120 GB SSD - Cosmos S Case w/side window + 8X 120mm fans
Reply to annisman

So i got another Acbel 510w.can it support the graphic?

Reply to dandy

Wouldn't hurt to try, but that looks like a downgrade from your current PSU.

ok i try.thanks a lot guys!!

Reply to dandy

grieve wrote :

I had a similar issue in Lotro... turned out to be DX10.
I turned off DX10 (lotro has that option) and she was good to go on Q9550/4870x2

Early on Lotro had dx10 problems, but they were mostly cured by the time they turned dx10 from beta to live. However lotro did last time I checked have HUGE issues with crossfire and sli, including single card 2 GPU solutions.

Reply to dtq

how to settle my dx10 problem?

Reply to dandy

Change Acbel 510w and reinstall the dx10 also same.
And some of the games also start having some problem.
example:when like few minute it start to blank a while then ok back and also some times like the display will shaky shaky at the center of the screen
any idea whats happen?

Reply to dandy

the display will "shaky shaky" ??? This might be more of an I-D-10-T error.

Try running it in DX9 mode if you right click on the Crysis launcher it should give you that option. However, this does not sound like a "DX10" problem, more like a power supply/ driver problem.

how to turn it to dx9 mode?right click d but nothing to choose.

Reply to dandy

hmmm, it should be there. Go to your Vista Games folder, and see if there is a second Crysis icon that might be DX9, or right click on that icon and see if it is there.

dont have.. i want to ask something.Gigabyte Odin 550W good or not?

Reply to dandy

no, for the love of god no, just buy a bloody decent psu. try and go for a dedicated psu maker.

Your computer is restarting then your graphics card is over clocked to sh*t or your PSU is handicapped. If you don't think so then run memtest86 it might be the RAM. You might not have voltages set up good enough like on the RAM or processor.

Message edited by bpogdowz on 09-14-2008 at 12:19:55 PM

Reply to bpogdowz

Then i use nvidia 9600Gt to run crysis everything seems fine.anyway i just warranty it and change to Sapphire HD 4850 .wednesday arrive.

Just want to say thank you to u all^^(gain some exsperience already)

Reply to dandy

you need to learn Engrish.

Change to Sapphire Dual Slot HD 4850 512DDR3
Everything run fine!!and Gainward HQ said the old batch or HD 4850GS got problem on blank screen and can 1 to 1 change to new batch.
Thanks guys!

Reply to dandy

Ask the community Add a reply

Tom's Hardware > Forum > Graphic & Displays > Graphics Cards > Totally crysis!!

Go to:

Help |
Forum rules

There are 1226 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 0.449 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel

Focus On

Totally crysis!!

Forum Graphic & Displays : Graphics Cards - Totally crysis!!

Please mind