Tom's Hardware > Forum > Overclocking > CPUs > Intel core 2 quad q9550 oc help

Intel core 2 quad q9550 oc help

Forum Overclocking : CPUs - Intel core 2 quad q9550 oc help

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Ask the community Add a reply
Word :    Username :           
 
maurick   10-30-2009 at 09:03:50 AM

i overclocked my system from 2.83Mhz to 3.6Mhz
with these specs
FSB frequency 424
pcie frequency 100
fsb strap to north bridge 333
dram frequency auto
dram timing auto

voltages
cpu voltage 1,21
cpu gtl references auto
cpu pll voltage 1,52
fsb termination voltage auto
dram voltage 1,90
nb voltage 1,40
the rest auto


is there anything to do?
my cpu temp is 28 o 27

6gb ram ddr3 1333mhz my ram


Add a reply
Sponsored Links
Register or log in to remove.
maurick   10-30-2009 at 12:18:08 PM
- 0 +

sorry that as 2.83ghz to 3.6ghz

Reply to maurick
Derbixrace   10-30-2009 at 06:26:54 PM
- 0 +

maybe you could tell what your temps is under 100% load using prime95 and small fft's :)

Reply to Derbixrace
maurick   10-31-2009 at 08:11:49 AM
- 0 +

ok i've change the clock of ram to 5-5-5-18
ram:fsb 1:1
fsb strap to north bridge auto
and dram voltage to 2.00

and i run cpu stabilty test for 7 hours and 40 minutes
no problem no errors no warnings
max temp 37c

i run prime95 small fft's for 15 minutes
max temp 47c

is that good?'

is my overclocked cpu stable??



Reply to maurick
djvibes2007   11-02-2009 at 01:14:01 AM
- 0 +

those temps are amazing, you must be running on water are you??

also how are you checking your temps, RealTemp, CoreTemp, Bios etc??

Reply to djvibes2007
maurick   11-02-2009 at 08:12:10 AM
- 0 +

no. i am using air
my heatsink is cooler master v8
i change my settings. am not running 3.6ghz but 3.4ghz

i run intel burn test
maximum temp is 50

when i run prime95 i reach ony 48

i use this settingz
Fsb frequency 400
dram frequency 801
dram timings 5-5-5-15
cpu voltage 1.2
fsb termination voltage 1.3
dram voltage 2.00
nb voltage 1.3


i test stress with occt for 1hour,,no errors max tem 38c
but when i run intel burn test boom 12c+ than occt


if i found new settings, i'll push it from 3.4 to 3.6



Reply to maurick
maurick   11-02-2009 at 12:35:07 PM
- 0 +

no. i am using air
my heatsink is cooler master v8
i change my settings. am not running 3.6ghz but 3.4ghz

i run intel burn test
maximum temp is 50

when i run prime95 i reach ony 48

i use this settingz
Fsb frequency 400
dram frequency 801
dram timings 5-5-5-15
cpu voltage 1.2
fsb termination voltage 1.3
dram voltage 2.00
nb voltage 1.3


i test stress with occt for 1hour,,no errors max tem 38c
but when i run intel burn test boom 12c+ than occt


if i found new settings, i'll push it from 3.4 to 3.6

Reply to maurick
Ask the community Add a reply
Tom's Hardware > Forum > Overclocking > CPUs > Intel core 2 quad q9550 oc help
Go to:

There are 504 identified and unidentified users. To see the list of identified users, Click here.

Forum map
Bestofmedia Forum ©
2000-2009 Bestofmedia Group
Page generated in 0.555 seconds
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them