/ Sign-up
Your question

I am trying to get the most out of my Q6600

  • CPUs
  • Overclocking
Last response: in Overclocking
November 1, 2009 7:59:02 AM

I am trying to get the most out of my Q6600 and the above is the settings that I have overclocked with. I am hesitant on the voltage not sure where I should start out at or where it should be at this FSB setting. Right now its set in the bios at 1.4v and shows up in CPUZ as 1.328v

Any suggestions?

More about : q6600

a c 134 à CPUs
a b K Overclocking
November 1, 2009 9:01:35 AM

Have you tried 400MHz? Just jump straight to 400MHz and see if 3.6 is stable. You should also bump the Vcore up to 1.45. If it is, great. If not, try a CPU multiplier of 8.5 and 8. If you have to use 8, that won't really get you anything, you'll still be at 3.2.
November 1, 2009 10:18:29 AM

what motherboard do you got? what cooler?