Newbie OCer - X48T-DQ6 / E8600 problem

Hello everyone and thanks in advance for helping,

I searched a lot across various sites for a solution to my problem, consulted several stickies but it seems i still miss a solution.

Some infos about my rig.

1. X48T-DQ6 rev 1.3 bios version F5
2. Intel E8600 3.33Ghz
3. 2x2GB DDR3 7-7-7-20 (1600 - Patriot - 1.9V)
4. Sapphire 4870 512MB
5. 2xVelociraptor 300GB
6. 850W PSU

My major problem is that bios sets my E8600 CPU @ 3.2GHZ , that is actually lower than stock GHZ (8x400 instead of 10x333) and doesn't allow me to either change CPU clock ratio or FSB ( CPU clock ratio , Fine CPU clock ratio, CPU Host Contol, CPU Host Frequency are all locked).

C1E and EIST are both disabled

How can i make the bios correctly setup my cpu and is there a way i can unlock Cpu clock ratio and FSB ?

I would appriciate any kind of help and sorry if i missed some potential answer on a different post or stickie.

That sounds a little funky. You mean by locked it is shaded out? You sure there isn't a CPU FSB control option that is on Auto right now?

On their CPU support list is says that it supports the E8600 @ 3.33GHz @ FSB 1333 with the F5 BIOS so you should be able to get at it some how. Look at tweaktown forums if you haven't. They have a dedicated gigabyte section where you might find a solution.