The best ram freuquency for q9550 3.6ghz

i was wondering what is the best ram frequency to match with my oc q9550 3.ghz
for now i'm at 1136mhz 2.08 voltage rams
fsb:ram ratio i think is 5:3 or 5:6

any advice from u guyz?

Here's a link to a thread where we discuss the advantages of a 1:1 ratio:
http://www.tomshardware.com/forum/251715-29-ratio-myth

Having said that, overclocking your memory (for little practical gain) is limiting your CPU overclock.

With a decent CPU cooler and a decent case, you should be able to get up around 3.4 - 3.6 GHz with stability.

Sorry. I was assuming that You were using DDR2 RAM. I am not sure of the DDR3 timing needed with a Core2 CPU.

You are operating way under the capacity of your memory.

If you can sqeeze another 25 MHz out of your FSB, you will be able to just pass 3.6 GHz.

What is your VID and CPU core voltage?

Your max temperatures look good. So unless your vcore is at 1.3625 volts (Intel's recommended max), you do have room to increase your vcore.

well i tried to get 3.6ghz but i failed to get it
2 cores were stoped working in 4 hours
vcore was 1.26 i think

i'll try to raise the voltge to 1.28

dram frequency 851 at 2.00 voltage
cpu pll 1.52
fsb term 1.30
nb 1.30


i think i dont have any problems with my rams so i'll just try to raise the vcore..

max temp was 53 50 51 54

did it,,after 6 1/2 hours i am stable at 3.6ghz
6 hours is fine for me

specs
fsb freq- 426
dram freq-1364mhz
dram timings 8-7-7-15

voltages
vcore 1.28
dram voltage 2.10
cpu pll 1.54
nb voltage 1.34
sb voltage 1.20
fsb term voltage 1.36


max temps 55-53-54-56
idle lo 30s


i think my temps are good aswell!!


i tried to get 4.0ghz but i'm afraid to lower my cpu lifespan!!



next step is to oc my gpu

i cant install any tool though

''driver not compatible''



any idea?

my gpu vapor x 4850

actual clock 700/1120


need other gpu oc tool!!