Can't Reach 1600 mhz- ga-ma790xt-ud4p - Ocz 1600 mhz ddr3 special ops

Forum Overclocking : Memory Can't Reach 1600 mhz- ga-ma790xt-ud4p - Ocz 1600 mhz ddr3 special ops

ok that is my problem i did every voltage combination but i didnt open it stable. i have 1 +1 and 2 +2 6gb ram

i tried to use 2x2 on white slots but no solution.. i ve latest bios f7 .

can somebody solve my problem ???

Reply to zotokan

need urgent help

Reply to zotokan

1600 (OC) means you need to overclock the ram to that speed, it will not run at 1600Mhz by default. AM3 CPU's are limited to 1333MHZ... The first thing you need to do is set the correct timings and voltage before you do anything. After that you can faise the FSB for RAM and CPU overclocking....

------------------------------

http://i683.photobucket.com/albums/vv199/OvrClkr/mod.png

Reply to OvrClkr

ok then. im a newbie for overclock i post it to ocz forums also but no comments the timings are 8 8 8 24 @1.9 v on the ram but when i do it on bios it freezes again

Reply to zotokan

did you set your ram frequency to 667Mhz?

------------------------------

Reply to OvrClkr

667 mhz ?

Message quoted 1 times

Reply to zotokan

zotokan wrote :

667 mhz ?

You need to set your RAM frequency as it appears here :

nomally default will be 533 = 1066 , so you need to change it to 667 = 1333

------------------------------

Reply to OvrClkr

gigabyte bios has different... i have x4 x5 x6 and x8

x6=1333mhz

x8=1600 mhz

i can run it at 1333 sometimes but not stable

but i never used it at 1600 .that makes me crazy

Reply to zotokan

Try running it at x6 = 1333Mhz and test 1 stick at a time using memtest.

------------------------------

Reply to OvrClkr

Ask the community Add a reply

Related content

See all topics related to "Can't Reach 1600 mhz- ga-ma790xt-ud4p - Ocz 1600 mhz ddr3 special ops"

Tom's Hardware > Forum > Overclocking > Memory > Can't Reach 1600 mhz- ga-ma790xt-ud4p - Ocz 1600 mhz ddr3 special ops

Go to:

Help |
Forum rules

There are 1728 identified and unidentified users. To see the list of identified users, Click here.

Page generated in 1.907 seconds

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel