Enough power

[fanaticvo0_20]

Hi, just wanted to Get some help concerning my Overclocking. ok Well i Have a Q6600 G0 Stepping, Ep43-DS3L Mobo, 4Gigs ocz 800, 9800GTX Asus Dark knight, And 3X 500GB Hdd's , Gigabyte 3D galexy Water Cooling,and a Blue Ray Drive. Now My Question is as Follows, I Can Reach 3.2Ghz and its perfect. but 3.4 and 3.6 just Rape and i get Bluescreens like mad, i can Boot into Windows with those Speeds, but as Soon as i start a Resorce intensive Program like 3Dmark 06, it jutters then Restarts. Now im thinking 1 of two things here. ither my mobo is not happy with the FSB 400? Or my 630w Psu Is Straining Under the Pressure. Tough one. Please Help guys Because im on my last Wit.

 

[JackNaylorPE]

Have you tried running OCCT and looking at the voltage / temperature graphs at the end as you inch up little by little from 3.2 ?

http://www.ocbase.com/perestroika_en/index.php

 

[fanaticvo0_20]

the temps dont matter i reach 68 max i have Water cooling

 

[ubernoobie]

Your watercooling system has a horrible pump, what is your voltage? bump the vcore up a bit and hope for the best

 

[fanaticvo0_20]

Haha its funny because my volts are 1.5000v and i bumbed it up to 1.5800, Still not stable

 

[fanaticvo0_20]

Iv left it at 1.50000v and put the MCH Voltage up to 1.4000v the highest, memory iv Clocked to 1.90000v, PCI-E latch to 100mhz, FSB 400, and ya you guessed it Still not Working It Runs Smooth in Windows But Games die Aswell as 3DMARK

 

[fanaticvo0_20]

I thought it was high, im at my highest multiplyer 9x, i think its my ram, Sigh

 

[fanaticvo0_20]

Any one else got this Problem? Any Suggestions?