Tom's Hardware > Forum > Graphic & Displays > Nvidia > CS:S and my gtx 260..

CS:S and my gtx 260..

Forum Graphic & Displays : Nvidia - CS:S and my gtx 260..

Tom's Hardware: Over 1.4 million members in 6 different countries available to answer all your high-tech questions. Sign up now! Its free!
Word :    Username :           
 

hey im getting gray hairs..
i just got my gtx 260 and when i run cs:s..i start from like fps 10..then the next second goes to like fps 190, and then the next second drops to like 10..this is very irritating, get me mad.

i kno is ridiculous that the game lags with a gtx 260, and i know there is a simple answer out there, but i dont know it :(

if any one out there can give me some advices on how to fix the fps deal, thx a lot.

here are my system specs:
CPU: amd 3.0ghz athlon 64x2 6000+
GPU: gtx 260
PSU: 650w
HDD: 250g sata/7200 rpm barracuda
MB: http://www.newegg.com/Product/Prod [...] 6813131281
RAM: 4ghz G.skillz
MONITOR: 22" HDMI ASUS/1680x1050pixels/59hz


Message edited by Diiego on 10-24-2008 at 07:13:59 PM
Sponsored Links
Register or log in to remove.

what do you get fps on test ?

Reply to fergie

very very low like 10s then skips to tops 70s, then down to 10s
and even the 3dmarkscore is like 1000 overall

Reply to Diiego

what aa and af etc are you using?

Reply to fergie

what overall fps on test video at start screen

Reply to fergie

what speed broadband

Reply to fergie

how do you check the aa and af??
all i know is the settings are in low and medium, and hdr is full, and im running it with directx9

Reply to Diiego

the speed broadband:
dsl 2m i think or dsl 768k not tht sure but i never had this problem with my old system and it had a radeon 9250, sucky

Reply to Diiego

options video advanced

Reply to fergie

Sounds software related. Have you used the latest drivers? Try the newest and an older one

Reply to blackwidow_rsa

you are talking about counter strike?

Reply to fergie

which drivers are you using

Reply to fergie

i just download it, and still the same problem ugh

Reply to Diiego

180.xx betas are out , they work just as good as the whql drivers

Reply to blackwidow_rsa

If your 3dmark 06 score is 1000, you have a serious problem.

Reply to roadrunner197069

re install your gpu, make sure it is flush with the motherboard.

also instal GPU-z and tell us whats the PCI-e bandwidth is

Reply to macer1

have you installed the drivers for your motherboard?
flashed the bios to the newest version?
made sure there was no thermal throttling of the cpu?
using the correct output setting (opengl vs directx vs software)?
cl_cmdrate / cl_updaterate @ 100, rate 20000, cl_rate 9999?
amd cpu drivers?

try all of those, come back with answers so we can help you better.

Reply to antiacid

you say you just got the gtx 260, what graphics card did you have in that system before the 260? when you say you had a 9250 in your old system do you mean that was the previous card? if so, you have to make sure you completely removed the drivers for the old card, then remove the old card, install the new card, then install the new drivers.

Reply to asymetriccircle

9250............ which slot are you incerting this card into. as the 9250 is a pci card.

make sure its the slot closest to the cpu.

Reply to macer1

i knoo roadrunner, the 3dmark test was awful, slooow, omg i dont know whats holding back my system

Reply to Diiego

asymetriccircle this a brand new system, custom, i just build it like a month ago, the 9250 was on another computer which still has it but i dont use it.

Reply to Diiego

alrite macer ill do that and let you know by tomorrow because right now i cant,

and anti acid ill put those commands in and give you answers

Reply to Diiego

What brand is your PSU? If it aint namebrand, it brobably isn't providind the power you need.

Reply to roadrunner197069

my cpu temp is high too, i got a zalman cooling fan 92mm, i just added artic 5 and the temp wont go down, is still around top 40s

should i add more artic??

you guys think i should overclock my cpu when the temp goes down and see if tht helps..??

or maybe is the graphic card bad, but i dont think so cause the in "evga precision tool" shows everything alright, this is very frustruating :(

Reply to Diiego

roadrunner is an xclio psu 650w

Reply to Diiego

I would get the PSU tested to see if its putting out the rated power.

Reply to roadrunner197069

how you test it?? i know it something in BIOS right?

Reply to Diiego

Use a psu tester or take it to a shop.

Reply to roadrunner197069

roadrunner i was thinking and dont you think the motherboard could be affecting my system performerance???

Reply to Diiego

Not really. All I can think that is wrong is PSU or ram, if your ram is running over 800.

Is your card running @ 16x or 1x, check it with GPU-z

Reply to roadrunner197069

okay the dram frequency is at 375.0 mhz/ 5.5.5.15

my card's bus interface is at pci-e x16 @ x16, and the bandwidth is 114.9 gb/s

Reply to Diiego

This seriously is a software issue. What OS are you running?

------------------------------ http://farm3.static.flickr.com/2617/3815217176_0a5be7955d_o.gif
http://farm4.static.flickr.com/3553/3818083596_1a772f7162_o.gif
Reply to Shadow703793

Virus and adware scan please.

Reply to San Pedro

im runnin window xp, sp 2 32 bit

Reply to Diiego

+1 for virus scan. Try re installing OS?

------------------------------ http://farm3.static.flickr.com/2617/3815217176_0a5be7955d_o.gif
http://farm4.static.flickr.com/3553/3818083596_1a772f7162_o.gif
Reply to Shadow703793

alright ill scan it and if that doesnt helps ill re install os

Reply to Diiego

^Before re installing OS try SP3 and see.

------------------------------ http://farm3.static.flickr.com/2617/3815217176_0a5be7955d_o.gif
http://farm4.static.flickr.com/3553/3818083596_1a772f7162_o.gif
Reply to Shadow703793

u checked everything inside ur pc? both power connectors connected to the video card? You dont know how many people forget to connect both ><

Reply to norV

People, FOCUS!

He's getting 1000 in 3d mark 06 with a 260.

Either:

Windows/DX is messed up
The PSU isn't putting out the juice
The card is faulty

One of these three.

Reply to gamerk316

gamerk316 wrote :

People, FOCUS!

He's getting 1000 in 3d mark 06 with a 260.

Either:

Windows/DX is messed up
The PSU isn't putting out the juice
The card is faulty

One of these three.




hey bro, before when i posted this i had a faulty psu, now i got a CORSAIR 650TX and i get a score of 2800's, i tested the psu and is alright, it could be that the card is faulty thats why im going to get a replacement, and try to reinstall OS and all the drivers, oh and basically the cpu fps is like 0

Reply to Diiego

dude an athlon 6000+ hell those are only like 3 yrs old

Reply to teamlosigp
Tom's Hardware > Forum > Graphic & Displays > Nvidia > CS:S and my gtx 260..
Go to:

There are 513 identified and unidentified users. To see the list of identified users, Click here.

Please mind

You are about to answer a thread that has been inactive for more than 6 months.
If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.

Add a reply Cancel
Sponsored links
  • Ask the community now
  • Publish
Ad
They won a badge
Join us in greeting them