Hey all,
I have this odd problem where my computer will freeze randomly within 5 minutes, unless I have Dynamic Energy Saver running... it's a Gigabyte EP45-DS3L updated to newest firmware, a Intel Core2Duo E7300, and my memory is 2X1Gb OCZ PC2-6400 memory
"DDR2 PC2-6400 Gold GX XTC Rev 2- 1GB Module
EL DDR2 PC2-6400/800MHz/Gold Gamer eXtreme/XTC Edition Rev. 2!
800MHz DDR2, CL 4-5-5-15 (CAS-TRCD-TRP-TRAS), Unbuffered, Gold
Layered XTC Heatspreader, 1.95-2.1 Volts, 240-Pin DIMM, 2.2V EVP."
I have the same response on both fail-safe and optimized settings, and I already have tried this on a fresh install of XP and Vista - both will crash unless I have DES running!
Robust Graphics Booster [Auto]
CPU Clock Ratio [10 X]
Fine CPU Clock Ratio [+0.0]
CPU Frequency 2.66 GHz( 266x10)
********* Clock Chip Control *******
>>>>> Standard Clock Control
CPU Host Clock Control [Disabled]
CPU Host Frequency(Mhz) [266]
PCI Express Frequency(Mhz) [Auto]
C.I.A.2 [Disabled]
>>>>> Advanced Clock Control
CPU Clock Drive [ 800mV]
PCI Express Clock Drive [ 800mV]
CPU Clock Skew [0ps]
MCH Clock Skew [100ps]
******** DRAM Performance Control ******
Performance Enhance [Standard]
(G)MCH Frequency Latch [Auto]
System Memory Multiplier (SPD) [Auto]
Memory Frequency (Mhz) 800
DRAM Timing Selecrable (SPD) [Auto]
>>>>> Standard Timing Control
CAS Latency Time 5 [Auto]
tRCD 5 [Auto]
tRP 5 [Auto]
tRAS 15 [Auto]
>>>>> Advanced Timing Control
tRRD........................................... 4
tWTR.......................................... 5
tWR............................................ 6
tRFC........................................... 42
tRTP........................................... 5
Command Rate (CMD) ....................:0
Driving Strength Profiles
Driving Strength ............................
Channel A
Static tRead Value.........................: 5
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Channel B
Static tRead Value.........................: 5
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps
Motherboard Voltage Control
Voltage Type.………... Manual
CPU
CPU Vcore….……….........................: 2.22500V [Auto]
CPU Termination…..... 1.200V.......:
CPU PLL…………………....1.550V.......:
CPU Referen.…………....0.805V.......:
MCH/ICH
MCH Core…………….....1.100V........... [Auto]
MCH Reference….…….0.760V...........; [Auto]
ICH I/O……………….....1.550V............: [Auto]
DRAM
DRAM Voltage ……....1.800V............: [Auto]
Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Enabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Enabled]
Integrated Peripherals
Legacy USB Storage Detect ..............[Enabled]
Facebook
Twitter
Instagram