While running 3dmark06 I got the BSOD!! My system is OC'd to 2.9ghz. Could there be an issue with my voltages? I am stable with prime95 and TAT running at full load. I did have my PCIE frequency at 90 instead of 100 if that could do it. I have been playing the crysis demo and it ran beautifully so I don't know what the heck is going on. It happened twice.
Thanks in advance for any help.
------------------------------e6600,Asus P5W DH Deluxe,2gb OCZ Platinum Revision 2,HD4850,Windows Vista Home Premium, Scythe Ninja
Isn't 2.9 a REALLY conservative overclock for an e6600? Prime95 is mainly a CPU/RAM tester and 3DMark06 is a CPU/GPU tester... so is there a chance your GPU is having problems? Perhaps your PSU isn't feeding your GPU enough? I know you mentioned you were playing Crysis, but I imagine that's less of a burden than 3DMark06. Crysis would be really demanding then less demanding... where as 3DMark06 would be punishing your GPU pretty much non-stop.
I did run 3dmark before my OC and wanted to see how it does now. I'll try it again as I was having another issue with my machine which seems to have worked itself out with a hard boot.
------------------------------e6600,Asus P5W DH Deluxe,2gb OCZ Platinum Revision 2,HD4850,Windows Vista Home Premium, Scythe Ninja
Reply to mickeddie
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.