Q6600 help!!

[yeldarb041]

hello. i am trying to overclock a Q6600 2.4 GO and i keep failing terribly My system is a P7N Diamond 780i, q6600 2.4, BFG 650W, 2x1GB OCZ Gold DDR2 667, 2x 9800 GTX+ in SLI, and a WD 250GB 7200 SATA II HD. Everytime i attemp overclocking, even to mild FSB of 1200, i sill save the bios and when the computer boots up, nothing comes on the screen. i have to hit a E-Z Reboot bios button and try again. any suggestions??

 

[LoneWolf_53]

If you haven't already there's a guide here that you might want to go over....... http://www.tomshardware.com/forum/240001-29-howto-overclock-quads-duals-guide

 

[yeldarb041]

ive gone over the stuff in the guide, but its not helping to much on the issue =[

 

[yeldarb041]

i can overclock the FSB to 1150 with bumping up the vcore and the DRAM and the NB voltage, and set the ram speed to 700, but if i try 1200, it wont boot

 

[scudst0rm]

is your PCIe frequency locked?

 

[yeldarb041]

i have it manually set at 100. i can get the system to go fine up to 1199, but if i go to 1200, it fails. ive been reading forums of people having this problem when SLI is enabled. i kind of got this board for OC the cpu and one with SLI