Fixing 8 beep problem Tags: Chipsets BIOS Cmos Graphics Overclocking Last response: February 9, 2010 2:32 PM in Overclocking Share megafreak February 9, 2010 1:07:18 PM I disabled the onboard graphics in the BIOS, will be re-enabled if I clear CMOS? Also, is there anything I should be aware of before I go ahead and clear the CMOS? More about : fixing beep problem | E-mail me updates | Report abuse Register or log in to remove LoneWolf_53 February 9, 2010 2:32:53 PM Any time you clear the CMOS it takes all the settings back to default so you have to go through and put things back to the way you want them. Always good to note what you've changed so that you can put things back to the way they were after clearing CMOS. | Report abuse Ask the community Publish Tom's Hardware>Forum>Overclocking>Fixing 8 beep problem> Related ressources: ForumAsus P 8 H67-M Pro 4- beep error ForumMultiple RAM sticks gives long beep problem Forum1 beep on motherboard fix ? ForumPC Won\'t Start, No POST BEEP /Boot or BIOS ForumPlease, help diagniosing and fixing after-built problem ForumOne Long Beep , Two Short Beeps (Laptop Display No Longer Working) ForumP5N-D problem/beep code ForumHelp! One long beep , three short beep problem . ForumBeep codes of asus a 8 m2n-la motherboard ForumOld PC no beep ForumNew system problem . Continuous beep on startup. ForumBurning smell. Invalid Beep code. Weird!! ForumDo I have a dead motherboard? No beep , no BIOS screen. ForumRampage 2 Extreme No Beep , No post (Already awnsered the 23 questions) ForumThree- beep POST error with new RAM/new GPU [ASUS P 8 P67LE] ForumCPU fan clicking? ForumHelp with graphics card problem ForumIntel ht tech problem ForumHelp for MSI 790FX-70GD & Sapphire 4890 Toxic Problem ForumProblem with Gigabyte P35-DS4 More resources Read discussions in other Overclocking categories CPUs Motherboards Memory Chipsets Heatsinks Water Cooling Intel AMD !