Hello everyone. I just purchased an AMD 955 C3 and am using a Gigabyte MA770T-UD3P. I am also using a Coolermaster Hyper 212+ for cooling. Ive been reading up on overclocking and it seems you need to also adjust the NB freq/voltage along with the CPU multipler/voltage for the best stability. Currently my settings are:
CPU multiplier: x19 (3817 mhz)
CPU Voltage: 1.425
NB Frequency: 2400mhz (2000 stock)
NB Voltage: 1.225 (up from 1.1 I believe)
HT link: stock (2000 mhz)
Currently stable in prime 95 for an hour (still running now).
Temps are 30 degrees idle and around 51 degress load.
Do these values look like somewhere in the range that they should be in relation to one another? Ill continue to run prime 95 and see if stability continues.
CPU multiplier: x19 (3817 mhz)
CPU Voltage: 1.425
NB Frequency: 2400mhz (2000 stock)
NB Voltage: 1.225 (up from 1.1 I believe)
HT link: stock (2000 mhz)
Currently stable in prime 95 for an hour (still running now).
Temps are 30 degrees idle and around 51 degress load.
Do these values look like somewhere in the range that they should be in relation to one another? Ill continue to run prime 95 and see if stability continues.
Facebook
Twitter
Instagram