Ok, while swapping out my MB, I noticed I have a loose wire on my 24 pin connector. It is a small orange wire that was bent so the area of pin 1, 2 and 13 side. Anyone have a Seasonic power supply that can look to see which pin it actually goes to?
For reference pin 3 has a small black wire going into it with the other normal wire. So I assume the orange is the same.
I was able to get pin 2 out with my molex tool. I just need a quick look from someone to verify which pin this wire goes to.
Thanks in advance!
If you have anothe version of the Seasonic PSU, any info would be helpful!
For reference pin 3 has a small black wire going into it with the other normal wire. So I assume the orange is the same.
I was able to get pin 2 out with my molex tool. I just need a quick look from someone to verify which pin this wire goes to.
Thanks in advance!
If you have anothe version of the Seasonic PSU, any info would be helpful!