Somewhere between this components i have conflict. I cant use any 3D accelerated app (like SolidWorks or Pro/Engineer, Catia..etc nothing 3D accelerated works)
Or somethimes does work for a few seconds and then freezes...
im trying to solve this problem since 2006 with no success
if anyone has idea...or had similar problem pls help!
this is detailed configuration of basic components:
MONITOR:
Monitor/Panel
Device ID : EIZO FlexScan T563
Maximum Resolution : 1280x1024
Horizontal Scan Range : 24.5-86.0kHz
Vertical Refresh Range : 55.0-160.0Hz
DPMS Energy Star Compliant : Yes
PnP/DDC Monitor Data
Manufacturer : EIZO
Device ID : EIZO FlexScan T563
Date of Manufacture : 03 December 1995
Type : RGB colour
CRT/Panel Size : 16 in
Horizontal/Vertical CRT/Panel Size : 320 mm / 240 mm
Input Signal Type : Analogue, Sync on Green, Composite Sync 0.7/0.3V
Gamma Factor : 1.80
DPMS Modes Supported : Off Suspend Standby
EDID Version : 1.01
System
Manufacturer : VIA Technologies, Inc.
Model : KM400-8235
ID : 02000100-04000300-06000500-08000700
System Chassis
Manufacturer : ASUS A7V8X-MX
Type : Desktop
Can be locked : No
Mainboard
Manufacturer : ASUS
Multi-Processor (MP) Support : No
MPS Version : 1.40
Model : A7V8X-MX
Version : A7V8X-MX
System BIOS : 08/03/2004-KM400-8235-A7V8X-MXC-00
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 2
Maximum Installable Memory : 2GB
Bank0/1 - A0 : DIMM 256MB
Bank2/3 - A1 : DIMM 512MB
Chipset
Model : ASUS KM400 CPU to PCI Bridge
Revision : A1
Bus : DEC/AMD EV6/HSTL+
Front Side Bus Speed : 2x 133MHz (266MHz)
Maximum FSB Speed : 2x 166MHz (332MHz)
Width : 64-bit
I/O Queue Depth : 4 request(s)
Maximum Bus Bandwidth : 2.08GB/s
Logical/Chipset Memory Banks
Bank 0 : 256MB DDR 2.5-3-3-7 2T
Bank 2 : 256MB DDR 2.5-3-3-7 2T
Bank 3 : 256MB DDR 2.5-3-3-7 2T
Supported Memory Types : ECC SDRAM DDR Registered
Bank Interleave : 4-way
Memory Bus Speed : 2x 166MHz (332MHz)
Maximum Memory Speed : 2x 200MHz (400MHz)
Multiplier : 5/4x
Width : 64-bit
Memory Controller in Processor : No
Power Save Mode : No
Fixed Hole Present : No
Maximum Memory Bus Bandwidth : 2.59GB/s
APIC 1
Version : 0.03
Speed : 17MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module
Manufacturer : SpecTek
Serial Number : 120156A9
Type : 256MB DDR
Technology : 8x(32Mx8)
Speed : PC2700U DDR-166
Standard Timings : 2.5-3-3-7 2-10-0-0
Date of Manufacture : 08 October 2003
Memory DC Line : 2.50V
Set Timing @ 167MHz : 2.5-3-3-7 2-10-0-0
Set Timing @ 100MHz : 2.0-2-2-4 1-6-0-0
Memory Module
Type : 512MB DDR
Technology : 16x(32Mx8)
Speed : PC3200U DDR-200
Standard Timings : 3.0-4-4-8 2-12-0-0
Memory DC Line : 2.50V
Set Timing @ 200MHz : 3.0-4-4-8 2-12-0-0
Set Timing @ 167MHz : 2.5-3-3-7 2-10-0-0
Set Timing @ 133MHz : 2.0-2-2-5 1-8-0-0
System Clock Generator
Software Programmable : Yes
Read-Back Support : No
Environment Monitor 1
Model : Winbond W83697HF ISA
Version : 6.00
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 29.00°C
CPU Temperature : 32.50°C
Cooling Device(s)
Auto Fan Speed Control : Yes
CPU Fan : 2860rpm
Voltage Sensor(s)
CPU DC Line : 1.56V
+3.3V DC Line : 3.04V
+5V DC Line : 4.82V
+12V DC Line : 11.63V
System Bus(es) on Hub 1
Version : 2.10
System Bus 0 : PCI
System Bus 1 : AGP
Multiplier : 1/4x
LPC Hub Controller 1
Model : ASUS VT8235 PCI to ISA Bridge
Revision : A1
ACPI Power Management Enabled : Yes
Delayed Transaction Enabled : Yes
Disk Controller
Model : ASUS A7V600/K8V-X/A8V Deluxe motherboard
Interface : ATA
Revision : A7
Channels : 4
Audio Device
Model : ASUS SoundMAX Integrated Digital Audio
Revision : F1
Type : AC '97
Version : 2.04
Audio Codec
Model : Gammagraphx 0000h
Revision : A1
Version : 2.04
Audio Codec
Model : Gammagraphx 0000h
Revision : A1
Version : 2.01
USB Controller 1
Model : ASUS A7V600/K8V-X/A8V Deluxe motherboard
Revision : I1
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : ASUS A7V600/K8V-X/A8V Deluxe motherboard
Revision : I1
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : ASUS A7V600/K8V-X/A8V Deluxe motherboard
Revision : I1
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : ASUS A7V600/K8V-X/A8V Deluxe motherboard
Revision : I3
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 6
Companion Controllers : 3
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 14kHz
Expansion Slot(s)
PCI0 (1h) : PCI 32-bit +5V PME Full-Length Available
PCI1 (2h) : PCI 32-bit +5V PME Full-Length Available
PCI2 (3h) : PCI 32-bit +5V PME Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Available
Port Connector(s)
PRIMARY IDE : ATA
SECONDARY IDE : ATA
FDD : 8251 FIFO / Floppy Disk
COM1 : Serial Port 16450 / 9 Pin Dual Inline / DB-9 pin male
COM2 : Serial Port 16450 / 9 Pin Dual Inline / DB-9 pin male
LPT1 : Parallel Port ECP/EPP / DB-25 pin female / DB-25 pin female
Keyboard : Keyboard / PS/2 / PS/2
PS/2 Mouse : Mouse / PS/2 / PS/2
USB0 : USB
AUDIO : Audio
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 2507 : Mainboard has too few memory slots. Upgrading the memory may be difficult or expensive.
Warning 2508 : All memory slots are full. Upgrading the memory may be difficult or expensive.
Warning 100 : Large memory sizes should be made of Registered/Buffered memory.
Tip 2546 : Large memory modules should be ECC/Parity.
Graphic CARD: ATI Radeon 9600PRo 256
Video Adapter
Display : \\.\DISPLAY1
Model : RADEON 9600 SERIES
VGA Compatible : No
Bus
Type : AGP
Version : 3.00
Current Data Transfer Rate : 4X / 8X
Maximum Bus Bandwidth : 264MB/s
Video BIOS
Date of Manufacture : 06 June 2006
Version : 135.F20
Direct3D Capabilities
Interface Version : 9.00
Model : RADEON 9600 SERIES
Video Driver : ati2dvag.dll
Library Version : 6.14.10.6360
Has 3D Hardware Acceleration : Yes
Hardware Transform & Light : Yes
Heads : 1
Pixel Shaders Version : 2.00
Vertex Shaders Version : 2.00
Video Driver
Expected Windows Version : 4.00
Screen Saver Active : 2 minute(s)
Low Power Saving Active : No
Power Off Saving Active : No
Device Mode Characteristics
Physical Medium Width : 270 mm, 11 in
Physical Medium Height : 203 mm, 8 in
Recommended CRT/Panel Size : 17 in
Horizontal/Vertical Resolution : 96x96 dpi
Colour Bits/Planes : 32-bit / 1-bit
Brushes : 4294967295
Pens : 4294967295
Colours/Shades : 4294967295
Pixel Width/Height/Diagonal : 36 / 36 / 51
Clipping Capabilities
Can Clip Output to Rectangle : Yes
Can Clip Output to Region : No
Raster Capabilities
Supports Banding : No
Supports Fonts Larger than 64Kb : Yes
Can Transfer Bitmaps : Yes
Supports Bitmaps Larger than 64Kb : Yes
Supports Device Bitmaps : No
Supports DIBs : Yes
DIBs on Device Surface : Yes
Flood Fills : Yes
Supports Windows 2.x : Yes
Stretch/Compress Bitmaps : Yes
Stretch/Compress DIBs : Yes
Supports Scaling : No
Palette-Based Device : No
Saves Bitmap Locally : No
Curve Capabilities
Can Draw Circles : Yes
Can Draw Ellipses : Yes
Can Draw Pie Wedges : Yes
Can Draw Chord Arcs : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Rounded Rectangles : Yes
Can Draw Interiors : Yes
Line Capabilities
Can Draw Polylines : Yes
Can Draw Styled Lines : Yes
Can Draw Wide Lines : Yes
Can Draw Wide, Styled Lines : Yes
Can Draw Markers : Yes
Can Draw Polymarkers : Yes
Can Draw Interiors : Yes
Polygonal Capabilities
Can Draw Alternate-fill Polygons : Yes
Can Draw Winding-fill Polygons : Yes
Can Draw Rectangles : Yes
Can Draw Scan Lines : Yes
Can Draw Wide Borders : Yes
Can Draw Styled Borders : Yes
Can Draw Wide, Styled Borders : Yes
Can Draw Interiors : Yes
Text Capabilities
Supports Stroke Clip Precision : Yes
Supports Stroke Output Precision : Yes
Supports Character Output Precision : Yes
Supports 90° Character Rotation : No
Supports Any Angle Character Rotation : No
Supports Independent X-Y Scaling : No
Supports Doubled Character for Scaling : No
Supports Integer Multiples for Scaling : No
Any Multiples for Exact Scaling : No
Can Draw Double-Weighted Characters : No
Can Italicise : No
Can Underline : Yes
Can Draw Strikeouts : Yes
Can Draw Raster Fonts : Yes
Can Draw Vector Fonts : Yes
Cannot Scroll Using BitBlt : No
Performance Tips
Tip 2221 : Driver is not certified.
Tip 319 : A refresh rate of at least 75Hz is recommended. Increase it if possible.
APM System Status Mains (AC) Line Status : On-Line
ACPI, APM, batteries settings
Supported S(leep) States : S1, S4, S5
UPS : No
Thermal Zones : Yes
Power Button : Yes
Sleep Button : Yes
Lid Button : No
Display Dimming Supported : No
Hibernate Supported : Yes
Wake Capabilities
Timer Wake State : S4
Drives Power Management
Drives Spin Down Support : Yes
Drive Spin Range : 3 second(s) - 1 hour(s)
Power Schemes
Home/Office Desk : This scheme is suited to most home or desktop computers that are left plugged in all the time.
Portable/Laptop : This scheme is designed for extended battery life for portable computers on the road.
Presentation : This scheme keeps the monitor on for doing presentations.
Always On : This scheme keeps the computer running so that it can be accessed from the network. Use this scheme if you do not have network wakeup hardware.
Minimal Power Management : This scheme keeps the computer on and optimizes it for high performance.
Max Battery : This scheme is extremely aggressive for saving power.
Battery (DC) Power Policy Settings
Lid Open Wake State : S0
Minimum Sleep State : S1
Maximum Reduced Latency Sleep State : S1
Maximum Sleep State : S1
Optimised for Performance : No
Processor Dynamic Throttle Policy : Adaptive
Processor Forced Throttle : 100%
Processor Minimum Throttle to OverThrottle : 0%
Processor Minimum Throttle to Start Fans : 100%
Mains (AC) Power Policy Settings
Lid Open Wake State : S0
Minimum Sleep State : S1
Maximum Reduced Latency Sleep State : S1
Maximum Sleep State : S1
Optimised for Performance : No
Processor Dynamic Throttle Policy : None
Processor Forced Throttle : 100%
Processor Minimum Throttle to OverThrottle : 0%
Processor Minimum Throttle to Start Fans : 100%
Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
Device Information
Device Type : VGA Video Adapter
Device ID : bus 1, device 0, function 0
Windows Device Name : RADEON 9600 SERIES
OEM Device Name : AMD (ATI) Radeon 9600 Series (V350)
OEM Hardware ID : VEN_1002, DEV_4150, REV_00
Device Name : Giga-Byte Radeon 9600 Pro
Product ID : VEN_1458, DEV_4022, REV_00
Revision : A1
AGP Capabilities
Version : 3.00
Command Queue Length : 256
Fast-Writes Support : Yes
Addressing Support : 32-bit
Isochronous Mode Support : No
Addressing Support : 32-bit
Current Data Transfer Rate : 4X 8X
Power Management Features
Version : 2.00
Supports Clock Slow-down : Yes
Supports D1 PM State : Yes
Supports D2 PM State : Yes
Supports PME# : No
Supports PME Clock : No
Device Capabilities
Line Cache Size : 8bytes
Latency Timer : 255 clk
I/O Range : Yes
Memory Range : Yes
Bus Master Capable : Yes
Special Cycle Recognition : No
Memory Write & Invalidate : No
VGA Palette Snoop : No
Parity Error Response : No
Address/Data Stepping : No
System Error Line : No
Fast back-to-back Transactions : No
Detects Parity Errors : No
Supports System Error Line : No
Supports Parity Line : No
User Defined Format : No
66MHz Bus Support : Yes
New Capability List : Yes
Device Select Timing : Medium
Multi-Function Device : Yes
Header : 00
Interface : 00
Hardware Resources
Memory Range : C0000000
I/O Range : 0000C000
Memory Range : E9000000
Irq. No. : 16
INT Pin : A#
Dynamic Management : Yes
While we appreciate detailed system specs, that was waaaaay too much info, most of it useless.
We need to know more about what troubleshooting steps you have taken. Mainly, have you completely updated your operating system with all of its security patches and service packs? Are you using the latest drivers for your motherboard chipset, video card, and any other additional hardware? Have you updated the BIOS on your motherboard?
Message edited by mtyermom on 11-26-2008 at 12:17:25 AM
I have older drivers for video card coz with new CATALYST its even worse...
im using Win XP with SP2
i have latest drivers for chipset(VIA Hyperion 4in1)
and, yes, i updated BIOS to latest...
I installed new catalyst driver over old ones...i have 2 control panels loaded and it works good for now...it seems like this solved a problem...
how?why? i dont know...
btw...now ar new problems coming...
somewhere during working on comp it freezes and monitor turns off and displays a messahe avout voltage over the top value...
so i guess all this problems are conflict between Ati Radeon 9600Pro and Eizo monitor...
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.