Cannot oc my 945 without becoming unstable
Last response: in Overclocking
im trying to overclock my 945 using an asus m477td mobo. i can get it to 3.2 but is not quite stable. any little bit of voltage i give it causes it not to boot, says "overclocking failed, over voltage failed". not really sure what to set my NB while overclocking or if at all. new to ocing but am familiar with my bios any help i would appreciate! trying to reach 3.6 or so.... thanks
More about : 945 unstable
hi there 3.75 sound good for that cpu but u can try these settings to see if u can get it higher set cpu voltage to 1.50 to 1.525 set nb freg to 2600 leave ht at auto set cpu northbridge to 1.2 maybe 1.3 set the northbridge voltage the same as the cpu northbridge to upping your ram voltage to 1.8 to 1.9 well help stable the computer if u r useing tight settings on your memory try these and see what it does
Related ressources:
- ForumSystem becoming unstable ....reboots, beeps....
- ForumUnstable new build failing prime95 blend test
- ForumThe Best OC Profile for AMD Phenom II X4 940 WITHOUT additional
- Forum5850 overclock unstable after updating drivers?
- ForumCrucial M4 128GB SSD - master boot record frequently becoming corrupt
- Forum7870 OC Problems, Unstable even @ 1175 - 1.3v
- Forumsystem unstable after adding memory
- ForumAudio Driver for FoxConn 945 P7AA-8KS2
- ForumMSI Radeon HD 7770 easily crashes/ very unstable
- ForumReplacement for unstable ASUS P5QL-VM EPU?
- ForumHelp! System become unstable
- ForumWin7 64-bit on Pentium D 945 3.4?
- ForumAMD Overclocking Club
- ForumDeneb won't clock as high as we'd hoped in 2008
- ForumHelp Overclocking AMD Phenom II X4 945
- ForumCrossfire HD7870 x8 questions?
- ForumPhenom II X4 unstable Vcore
- ForumCard reader without cooling fan control
- ForumPC1600 RAM unstable at rated speed?
- Forum[Solved] Getting past 3.6GHZ without crashing
- More resources
Read discussions in other Overclocking categories
!
