FOXCONN+i7 Overclocking

''
11 answers Last reply
More about foxconn overclocking
  1. ''
  2. Start by reading the Core i7 Overclocking Guide twice.
    If you have any specific questions/issues after reading through the guide, please post back.
  3. ''
  4. I think safety is normal on the new board bat dont thrust

    But system reboot all time what to do ?????
  5. Bytes_007 said:
    By the way, in the " CORSAIR HYDRO SERIES H50 REV 2" if the pump stop's working is there a safety system intregrated in the Bios?

    Yes, as long as you connect the pump to the CPU fan header there should be some sort of safety feature at work.

    Overclocking these CPU's really is not to difficult.
    The guide linked above should get you well on your way.
  6. Bytes_007 said:
    I think safety is normal on the new board bat dont thrust

    But system reboot all time what to do ?????

    Try going through This Checklist.
    If it does not help, please post back more detailes on your issues.
  7. outlw6669 said:
    Try going through This Checklist.
    If it does not help, please post back more detailes on your issues.


    Disable overclock recovery under the oc gear bit of the quantum bios.
  8. Bytes_007 said:
    I think safety is normal on the new board bat dont thrust

    But system reboot all time what to do ?????


    Disable overclock recovery under oc gear in quantum bios.
  9. FlamingBlade GTI
    Intel CORE i7 920 2.66GHZ Overclok 3.460


    I put to 10 MHz increments which lead me to 173MHz and a 3.4GHz OC. Not touched the voltage, FlamingBlade GTI is Awesome.

    More than that the window blue screen.

    Tks all.
  10. ''
  11. Looks Good!
Ask a new question

Read More

Motherboards Overclocking