Im fairly new to computers and stupidly bought a dell e520 a couple years ago...i wanted to upgrade my graphics from 7300 le to an 8600gts (as this is the only 8 series that will fit in my case without modifications or cutting) the problem is that my power supply unit is only 305 (i think) and now when i run vista it tells me not enough power is running to it so its running on basic.
What power supply unit would you recommend for a budget and i need one for a dell e520.
Im fairly new to computers and stupidly bought a dell e520 a couple years ago...i wanted to upgrade my graphics from 7300 le to an 8600gts (as this is the only 8 series that will fit in my case without modifications or cutting) the problem is that my power supply unit is only 305 (i think) and now when i run vista it tells me not enough power is running to it so its running on basic.
What power supply unit would you recommend for a budget and i need one for a dell e520.
Any help would be great
Kind regards
Samuel
I had a single-slot 8800GT in my Dell e521 which is the same BTX case with a Zalman VF900 cooler on it. I used a Silencer470 psu in it. Your 305w psu has 22amps which is plenty for a 8600GTS unless you didn't have the pcie connection to the card hooked up.
------------------------------ P35-DS3L Rev 2 bios F9C l E8400 @ 3.6Ghz @ 1.232v l OCZ Vendetta 2 /LGA775 Bolt-Thru l 4GB G.Skill 8800PI@1000mhz 4:5 @ 1.87v l WD3200AAKS 320GB l Evga 8800GTS 512 l X-Fi Xtreme Music l Corsair HX520 l Antec Sonata III 500 l Vista32 SP2 l Win7 X64 7600
Reply to kpo6969
Just wanted to say thanks to everyone for taking the time to reply top this thread.
As stated above, my dell power supply unit did not come with any molex connector (if that's how you spell it) and as im planning on getting a few more things for it i decided to get a 500w power supply which came with the 6pin connector for the 8600gts card. It worked fine after installing and you can fit any standard psu in the dell dimension e520 with the psu model i had (see above) everything now working great and vista score jumped from 3 to 5 and games such as age of empires 3 and command and conquer play at full graphics setting which im really happy with.
Hope this thread helps other dell users who feel a bit stuck with the factory spec and layout inside
Just wanted to say thanks to everyone for taking the time to reply top this thread.
As stated above, my dell power supply unit did not come with any molex connector (if that's how you spell it) and as im planning on getting a few more things for it i decided to get a 500w power supply which came with the 6pin connector for the 8600gts card. It worked fine after installing and you can fit any standard psu in the dell dimension e520 with the psu model i had (see above) everything now working great and vista score jumped from 3 to 5 and games such as age of empires 3 and command and conquer play at full graphics setting which im really happy with.
Hope this thread helps other dell users who feel a bit stuck with the factory spec and layout inside
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.