Sign in with
Sign up | Sign in
Your question

I7 920 changed bios settings but still says @2.67?

Last response: in Overclocking
Share
April 18, 2010 10:09:43 PM

hi guys i recently have tried overclocking my intel i7 on a p6x58d premium motherboard my bios setting will be posted at the bottom of this post anyways. i saved and exited and i checked on the properties of my computer and it still says that intel icore i7 920 @2.67 ghz(8CPUS),~3.4Ghz does that mean that it did not over clock? if so what did i do wrong what am i missing?

Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[21.0]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[172]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1379MHz]
UCLK Frequency.........................[2758MHz]
QPI Link Data Rate.....................[Auto]

CPU Voltage Control....................[Manual]
CPU Voltage............................[1.20000]
CPU PLL Voltage........................[1.80]
QPI/DRAM Core Voltage..................[1.20625]
IOH Voltage............................[1.14]
IOH PCIE Voltage.......................[1.50]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[1.50]
DRAM Bus Voltage.......................[1.64]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]

Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[800mV]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Auto]
PCIE Spread Spectrum...................[Disabled]

C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel(r) Virtualization Tech...........[Disabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel(r) HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel(r) SpeedStep(tm) Tech............[Disabled]
Intel(r) C-STATE Tech..................[Disabled]
a b å Intel
a c 202 à CPUs
a c 148 K Overclocking
April 18, 2010 11:37:20 PM

Use a tool like CPU-z to see where you are ..... it will list BOTH what you have:

"Intel i7 920 @2.67"

and what it s running at
m
0
l
April 18, 2010 11:38:55 PM

yea i just downloaded it it still says @2.67 but what i also noticed is that the core speed is 3611.8 is that what got overclocked? is that all that matters? is the 2.67 just something thats there because of the manufacturer but not related entirely to its clock speed?
m
0
l
Related resources
a c 102 à CPUs
a b K Overclocking
April 19, 2010 1:07:17 AM

Your results show that you have overclocked your 2.66 GHz CPU to 3.61 GHz (35% OC)! Keep smiling! Check your voltages. Do not exceed the max voltages for your CPU and for your RAM.
m
0
l
a b K Overclocking
April 25, 2010 9:13:37 AM

Nice OC tho 3.6GHZ, Hope you're not using Stock Cooling!
m
0
l
!