Sil 3112A SATA RAID controller-User guide gives information on setting up RAID1 but does not tell you how to recover info from the mirrored set after one drive dies, can anyone help?
Sil 3112A SATA RAID controller-User guide gives information on setting up RAID1 but does not tell you how to recover info from the mirrored set after one drive dies, can anyone help?
Shut down the PC and reboot into the RAID set-up. Break the mirror and shut down the machine. Replace the dead drive with a new one and power the machine up. On boot up go into RAID set-up and designate the new HD as part of the mirror. It should recover automatically once you proceed.
Shut down the PC and reboot into the RAID set-up. Break the mirror and shut down the machine. Replace the dead drive with a new one and power the machine up. On boot up go into RAID set-up and designate the new HD as part of the mirror. It should recover automatically once you proceed.
Thanks Shadragon
Will give it a try, need to find a SATA drive of same size or bigger.
You are about to answer a thread that has been inactive for more than 6 months. If you still wish to proceed, please ensure that your posting is original and does not duplicate or overlap any prior responses to this thread.